MCWILLY Member 190 Member For: 14y 7m 9d Posted 18/06/12 10:51 PM Author Posted 18/06/12 10:51 PM Are they just replacement pipes that still look standard? I didn't want to get rid of the cross over just yet as it looks factory then
MCWILLY Member 190 Member For: 14y 7m 9d Posted 18/06/12 10:56 PM Author Posted 18/06/12 10:56 PM What's a good cat to get and can you get ones that bolt on?
_Velocity_ Legacy Donating Member 2,768 Member For: 15y 4m 24d Gender: Male Location: Victoria Posted 19/06/12 12:13 AM Posted 19/06/12 12:13 AM If you are looking at E85 down the track go bigger than Deka 60s. Not sure about 80s but ID1000s are probably a better injector for E85 unless you want to buy different ones when you go back for the E85 tune.
knoles Legacy Donating Member 390 Member For: 15y 6m 1d Gender: Male Location: Port Hedland Posted 19/06/12 02:03 AM Posted 19/06/12 02:03 AM http://www.ebay.com.au/itm/3-VENOM-High-Flow-Metal-Cat-WRX-XR6-Turbo-Skyline-VL-FPV-F6-GTR-S15-S14-SUPRA-/250992961913?pt=AU_Car_Parts_Accessories&hash=item3a7058a979#ht_3581wt_1037This is the cat I have, it works a treat. Other wise there is a group buy going on for Ballistic cats. Both will have to be welded in, if this is an issue get a spare cat pipe from a wreckers and get it welded in that. Cooler pipes on B series should be fine, FG's is where the pipes become an issue. Keep an eye out for a second hand Process west or plazmaman stage 1 replacement coolers if you really want to keep costs down and retain factory looking engine bay, they come up all the time. You'll probably need a walbro gs340 fuel pump too then. 1
rbjet Skid Machine Legacy Donating Member 1,640 Member For: 15y 3m 25d Gender: Male Posted 19/06/12 02:26 AM Posted 19/06/12 02:26 AM If you only plan to do the mods you listed you'll be lucky to make 270rwkw and if you don't upgrade your cooler it will be an inconsistent 270rwkw.For the power you are wanting, a high flow cat is a must. Most exhaust shops will weld one in for between $300-$400. Buy a venom cat off eBay and get it welded in if you want to save a bit of coin.As knoles said, your cooler piping will be fine but a second Process West or Plazmaman cooler would be the best choice.I made 300rwkw on a stock fuel pump so I guess with your mods and 280rwkw your pump should be fine.Bosch 968's or Deka 60's would be your injector of choice. 1
Vevapower Waiting for the 1st N/A 12! Legacy Donating Member 2,533 Member For: 18y 7m 7d Gender: Male Location: Sydney Posted 19/06/12 10:26 AM Posted 19/06/12 10:26 AM ID 1000's do it once do it right, I even just today seen them online for $120 each!!! 2
Kv! Legacy Donating Member 1,132 Member For: 16y 7m 2d Gender: Male Location: Eastern Suburbs, Melbourne Posted 19/06/12 10:29 AM Posted 19/06/12 10:29 AM (edited) every time I see a topic on injectors, I automatically follow it, just for the arguments and lulz Edited 19/06/12 10:29 AM by Kv! 1
lrmcdowell Legacy Donating Member 730 Member For: 15y 23d Gender: Male Location: Randwick, sydney Posted 19/06/12 10:32 AM Posted 19/06/12 10:32 AM hID 1000's do it once do it right, I even just today seen them online for $120 each!!!WHERE?!?!?!?!?!
Vevapower Waiting for the 1st N/A 12! Legacy Donating Member 2,533 Member For: 18y 7m 7d Gender: Male Location: Sydney Posted 19/06/12 10:48 AM Posted 19/06/12 10:48 AM hWHERE?!?!?!?!?!http://www.mazworx.com/products/fuel-delivery/injectors/injector-dynamics/
lrmcdowell Legacy Donating Member 730 Member For: 15y 23d Gender: Male Location: Randwick, sydney Posted 19/06/12 10:55 AM Posted 19/06/12 10:55 AM cheers veva...any idea what size I would need? (fg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now