Ba Turbo 1/4 Times Advice

[Never had any say Panda]

Not familiar with the Auto and the Turbo mix so I'll throw in a possibly uneducated comment.. Your 14.4 sec time is almost spot on the second run I ever did in an FG ute (manual) when I couldn't get the back tires to grip on any of the shifts??

Did it feel like it was ice skating down the track on the shifts?

[xr6_2001]

Not familiar with the Auto and the Turbo mix so I'll throw in a possibly uneducated comment.. Your 14.4 sec time is almost spot on the second run I ever did in an FG ute (manual) when I couldn't get the back tires to grip on any of the shifts??

Did it feel like it was ice skating down the track on the shifts?

that's the thing, I gave the car everything I could, no wheel spin max stall when leaving the line no wheel spin at all down the track, trans was not slipping.

[xr6_2001]

Got car booked in Thursday @ 10am with heinrich here in adelaide, so hopefuly I can let you guys know some good news, or what the problem is/was.

[Henz]

A 2.4 60ft with no wheel spin doesn't sound right at all. Definitely something wrong.

[xr6_2001]

put on dyno, got 254rwkw Bruce advised got boost leak only running 7psi boost and 2 bolts missing back of turbo, also my dyno graph was NOT nice and flowing through the power, sort of jumps around a bit he said the knock sensors are trying to adjust timming, he suggested the cat is stuffed, got it booked in for cat in a hour and will put new bolts in and take it back see how it goes, he said it's good for 320rwkw

Edited 22/09/11 04:49 AM by xr6_2001

[xr6t_ute]

Very good, always a good thing to throw it on the dyno, the buck stops there, and you can see what it's doing.

[xr6_2001]

well cat got pulled off, cat is fine no problems with it, so I have to rebook it in next week with bruce to get retuned, ran out of time today.