Opinions On Cams And Injectors

[cranners]

Good Evening all,

Only being new to this site im still finding my way around it so if this isn't the right section please dont shoot me

Basically my XR6 is stock, apart from a aftermarket cooler and an axhaust, with this its been tuned at 258rwkw...which isn't too bad!

Im looking at getting the injectors and valve springs done, but am unsure as to what injectors are good?

Also maybe looking at replacing the cams with something a little more aggressive, is this a wise option??

Thanks in advance!

Cranners

[Buf-Phoon]

wouldn't bother with the Cams IMO.

Depending on the power your chasing

Bosch 968s will limit you to around 330 rwkw

Siemens Deka 60lb will give your tuner more scope and will support more power .

Some for sale second hand or try any of the forums advertisers

http://www.fordxr6turbo.com/forum/index.php?/topic/61163-vic-siemen-deka-60lb-injectors/page__pid__931006__st__0entry931006

[cranners]

Thanks for the reply mate!

Yeah I had my eye on the deka 60lb ones off ebay, and noticed there are some for sale on here too :-)

[MiKa]

I'd rather buy off here than ebay anyday!! Make sure you ask whoever you buy them from if they are flow matched...