Just Cut A Hole And Move The Deck He Said ...

[KAL_SPL]

Prob around 10K swapped hands , the replacement on the tray alone would be 10K fitted , we havnt tallied up the cabs system as of yet.

[KAL_SPL]

More polishing , will have completed this weekend and running.

[KAL_SPL]

All polished up , box is now covered and ports fitted , just need to weld it all together and slide it in then box can go back in for the final time !

Top panel will be black suade aswell which will be covered when Im happy with the port fitment , atm its not quite 100% on what I want it , the machining is slightly out from what I should have given him measurements for :(

[alpha]

lookin gooood :smilelove:

[Flukey]

Impressive.

[KAL_SPL]

All finished , bloody loud to , the best part is everything works and sh*t , cant be happier

[robbo k]

did u end up replacing the poineer subs in the back with something else?

[KAL_SPL]

Nope just rewired them to a 4ohm load instead of 1 , the amp is only rated down to 2 ohm hence why it was cutting out.

@ 4ohm it still makes 1000rms and let me tell you theres still ample power to make it run perfectly for our application , the plus side is that current draw is ALOW lower so batteries last longer which given the intended use is the base scenario

The subs in the cab are dual 1.5s so I was a bit worried bout getting enough power before it cut out but given the 20mm flex on the windscreen with flat batteries I would say its not a concern.

If we do get good numbers as it is now I will swap the amp for my D3 just to use for an SPL comp , that's capable of 3000rms @ 0.25ohm.

If that's still not enough I will add the 2nd D3 see if I cant crack the windscreen

[JETURBO]

sick as man how many db she puttin out?

[KAL_SPL]

Haha nfi at the moment , closest meter is 600km away.

Educated guess is close to 145 , how ever it sounds closer to 150 by ear , different spots in the car have different pressure.

Will find out at Powercruise unless I get a meter before hand.