XRSics Legacy Donating Member 325 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 14/12/08 07:37 AM Posted 14/12/08 07:37 AM Just gone out to do the simple procedure of replacing my clutch fluid. Ive jumped under and started to crack the nipple when next thing this falls to the groundAfter looking at the end its obvious its snapped off. As quick as the clutch fluid started dripping, so were my tears. I can only imagine this is going to be quite an expensive little project..? does any1 know what im looking at to fix this??Will the box have to come out?? I am starting to really worry as I got fark all tools with me here and even less money Any thoughts are welcome.PS. It has since taken me putting it in the vice to finally get the nipple to crack
ETM Member 1,194 Member For: 19y 6m 14d Gender: Male Location: syd south Posted 14/12/08 08:03 AM Posted 14/12/08 08:03 AM take it to a trans shop, we have mine out and back in in less than 2 hours, I would never lay on my back doing gearboxes again.
XRSics Legacy Donating Member 325 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 14/12/08 08:25 AM Author Posted 14/12/08 08:25 AM fark, what kinda $$ u think but?? 300?? dunno how to get it to 1?
beauies Member 209 Member For: 23y 5d Gender: Male Location: sydney Posted 14/12/08 08:28 AM Posted 14/12/08 08:28 AM cant buy this as a spare part, found out the same way a few years ago managed to get one from ferntree gully wreckers might save you pulling box out otherwise a new slave cylinder
XRSics Legacy Donating Member 325 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 14/12/08 09:18 AM Author Posted 14/12/08 09:18 AM So I can remove the rest of the line and replace with a new one?? are they threaded in? I would have thought not..
TURBO4LT Member 1,533 Member For: 23y 1m 9d Gender: Male Location: NSW Posted 14/12/08 09:55 AM Posted 14/12/08 09:55 AM The box needs to come out the broken bit is still in the CSC it has a pin that holds it in, while you have it out may as well put an alloy CSC in sorry about the crappy pic
XRSics Legacy Donating Member 325 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 15/12/08 03:21 AM Author Posted 15/12/08 03:21 AM Noooooooooooooooooooooo!!!!
XRSics Legacy Donating Member 325 Member For: 17y 11m 21d Gender: Male Location: Melbourne Posted 15/12/08 03:25 AM Author Posted 15/12/08 03:25 AM take it to a trans shop, we have mine out and back in in less than 2 hours, I would never lay on my back doing gearboxes again.Where bouts is this place?? just called ford (for intrest sake only) and they quoted 580 for the new csc and 4 hours to do it lol
stealthxr Legacy Donating Member 553 Member For: 20y 7m 21d Gender: Male Location: The Shire Sydney AUS Posted 15/12/08 04:02 AM Posted 15/12/08 04:02 AM Ring Mal Wood automotive , he has them it is about half the price and its alloy. I have been also advised the Expensive Daewoo T56 CSC will bolt straight up and is the alloy equivilent to the ford one, maybe a Expensive Daewoo wrecker or something of the like might be able to help you !Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now