Toyota Lexcen

[weedo_86]

the motor would be the buick, the ecotec was released in the vs series

[GCTXR6]

gday the series one motors had a 6pack coil pack and the thermostat housing out the rear of the inlet manifold ,

,and the series 2 motors had 3 coils and the thermostat housing at the front

I know this as I work for racwa and spend half my day under the bonnets of these things

hope this helps cheers G

[shitbmxrider]

are you sure? hmmm, I know the first V6 motor was only around for a couple of years...

Hey, I'm a FORD salesman anyway!

Hey, im a MAN Salesman, yet I know a whole lot about Volvo's, Benz's, DAF's, Scania's, Iveco's......

[t6xr]

Yeah Iveco's are gutless and the Volvo auto's have a sh*t load of problems and im not a

salesman!!!!

[bluute]

hey not sure if the problem has been solved but shouldnt an engine number and a phone call clear it up

should there not be a computer somewhere with that info at a toyota dealership

[RHR]

if your not 100% sure ring toyota with the vin to get the build date. Then work out if the bulid date falls within series 1 or 2

[gravelrash]

vn series 1 - top radiator hose goes along chassis rail than up the back of the motor.

vn series 2, vp & vr used the same engine - top radiator hose is to the front of engine.

vs was the ECOTEC, identified by the plastic cover and external oil galley on back of motor.

hope this helps.

[senna_T]

well obviously my memory was useless.... Did you find out what model it was yet?