Slash737 Member 107 Member For: 21y 7m 1d Gender: Male Location: western melbourne Posted 02/01/08 10:11 PM Posted 02/01/08 10:11 PM im looking to get the xr6t lowered soon and was looking through the king springs online catalogue. does anybody have any info as to why they have a different listing for BF MKii, thought they would be same springs as BA.ba BF front - KFFL-57/520BF MKii front - KFFL-53SSLHD
Josh636 Member 65 Member For: 18y 11m 24d Gender: Male Location: Mount Isa Posted 05/01/08 05:59 AM Posted 05/01/08 05:59 AM HeyI noticed the same thing in the catalog....???I am getting some sl au springs to put in the front of my bf mk2 ute, hopefully they will fit....cheersJosh
forced Member 97 Member For: 20y 8m 30d Gender: Male Location: south australia Posted 05/01/08 11:23 AM Posted 05/01/08 11:23 AM bf spring must be diffrent for you need a proper spring remover to replace the spring on to struts found this out when I lowered my ute also got bad axle tramp now I have lowered the rear have used king springs through out
Guest EGOXRT Guests Posted 06/01/08 10:55 PM Posted 06/01/08 10:55 PM The KFFL-53SSLHD is for the BF SerII only and will not fit the BF SerI and earlier.The KFFL-53SSLHD is approx 60mm shorter on free height and different in the inside diameter.
forced Member 97 Member For: 20y 8m 30d Gender: Male Location: south australia Posted 07/01/08 06:28 AM Posted 07/01/08 06:28 AM just fitted king springs to back of me ute and now have real bad axle tramp has anyone else had the same thing happen to them.When I had standard springs no tramp .is there a cure as the ute looks better lowered
Guest Wingnut Guests Posted 07/01/08 06:32 AM Posted 07/01/08 06:32 AM Mal Wood put a kit together to stop this I believe. Should be on his website check it out.I don't have a ute but do have king springs and will sometimes get tramp. Just means I haven't put the foot down far enough
Slash737 Member 107 Member For: 21y 7m 1d Gender: Male Location: western melbourne Posted 07/01/08 07:51 AM Author Posted 07/01/08 07:51 AM thanks egoxrt.so I have to get these for my bf2 then. do u know how much it lowers the car from standard xr hight?
Guest EGOXRT Guests Posted 07/01/08 08:31 AM Posted 07/01/08 08:31 AM Hey Dude.I don't know but just pop Kris Tarrant at Kings an email and he will fill you in mate. [email protected]
Slash737 Member 107 Member For: 21y 7m 1d Gender: Male Location: western melbourne Posted 07/01/08 09:35 AM Author Posted 07/01/08 09:35 AM cool, ill email kris and report back with some answers hopefully.
Slash737 Member 107 Member For: 21y 7m 1d Gender: Male Location: western melbourne Posted 08/01/08 02:09 AM Author Posted 08/01/08 02:09 AM The KFFL-53SSLHD is for the BA SerII only and will not fit the BA SerI and earlier.The KFFL-53SSLHD is approx 60mm shorter on free height and different in the inside diameter. We have King Springs Part No's KFFL-53SSLHD (front) & KFRL-68SSL (rear) to lower your vehicle approximately 30-35mm from factory std height.These springs are designed with an increase in spring rate of approximately 25%.RRP is $ 160.00 + GST per pair frontRRP is $ 160.00 + GST per pair rear.I assume kris ment BF not BA.is the 30-35mm drop what others have experienced? im a little worried that it might be a little too much.or is the drop from falcon xt height not xr height.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now