Jump to content

Recommended Posts

  • Member
  • Member For: 20y 2m 22d
  • Gender: Male
  • Location: Melbourne
Posted

Advice needed

have the 6 speed box and am getting some 2nd gear crunch especially when the box is cold.

Have taken it to ford and they changed all the syncro's and it still does it

any ideas for what it could be??????????

  • - Track Bound EVO III -
  • Member
  • Member For: 21y 9m 24d
  • Gender: Male
  • Location: Strapped in and holding on
Posted

Clutch release bearing sticking..

Has your pedal 'friction point' moved, ie lower to the floor??

  • Member
  • Member For: 20y 2m 22d
  • Gender: Male
  • Location: Melbourne
Posted

maybe.........what would that do?????

  • Member
  • Member For: 21y 2m 28d
  • Location: SA
Posted

Apart from what F6 ute said, are you still running the factory trans oil? If so, switch it to Transmax Z, it made a vast improvement in the shift quality of mine.

  • Legacy Donating Member
  • Member For: 20y 8m 3d
  • Gender: Male
  • Location: The Shire Sydney AUS
Posted

Id be lookinjg closley @ your clutch fluid first (Known Problem) the heat generated in that area breaks down the fluid and turns it into Muck replace it asap with something decent.....not the ford product, BTW Transmax Z is the top oil replacement for the gearbox and it does improve shift quality..... but I dont think it is the cause of your problem...

Try the clutch fluid first... Bleed it properly... good luck !!!!

pete :idunno:

  • Legacy Donating Member
  • Member For: 22y 8m 8d
  • Gender: Male
  • Location: brisbane
Posted

I have the same issue mate.... ford just said its not bad enough to worry about and should get better with more K's :idunno:

sometimes it feels like ive left the box on the road :bowdown: the thing is that most times its ok... does not do it all the time......

I have had a new clutch put in and that did jack

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 21y 17d
  • Gender: Male
  • Location: Perth
Posted

Check your gear stick is tight on the selector on the gear box and flush and bleed the clutch. You'd be amazed at the difference.. :spoton:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...