Any Tips On Installing Sway Bar

[bad inferno]

I have received my whiteline 27mm front sway bar...any tips on installation ? I did have a quick look under the car and it seems a very simple job...on the basis I can get underneath the car . Suppose I'll just jack up one side.

rob

[bencat]

un bolt old one, bolt in new one, get a set of nolathane or similar bushes for it, makes a difference..

How much did you pay for the bar and where from ?

Edited 22/12/06 08:37 AM by bencat

[bad inferno]

I paid 159.00 from Autobarn Dandenong....I know its a little high in price however came within a couple of days...

[bad inferno]

OH it came with a couple of bushes and some grease

[4ST-XR6]

yeah mate the job is a piece of piss. short 13mm socket and deep 14mm socket and you will have it done in 5mins

[F6 UTE]

supplied instructions give all the info that is needed.

Is a great mod..

[Guest newl]

Might want to consider a jack stand to go along with that jack. We wouldn't want you to not come back.

[cobrav8]

and better to jack up both sides so that it is level when you install.

[driftpig01]

A bit of a Hijack

I was speaking to Fulcrum about my suspension setup and they have a 3 point adjustable sway bar for the front it cost $260 has anyone tried one of these??

[bad inferno]

Thanks for the responses.....It corners sooo well you quickly forget how much of a change it has made and assumed it should of always been like this.

It was a 5 minute job thanks.....didn't really need to get under the car, it was easier from the sides.

rob