0 To 100 Times Useing G Tec Meter

[BALLBREAKER]

Guys got hold of a G TEC meter & timed my car 5.01 my best time. Big broblem taking off with traction .Take off 2800 rpm ride clutch out good then plant it starts frying them change into 2nd let go of clutch still burning rubber.Best result doing this 5.30.To get 5.01 I was only applying at the most 3/4peddal & after about 80 k plant it. That was the only way it could work for me. How can I lower this time?Any idea.

[shockF6]

my sugestion would be to keep frying the tyres. After you kill them you can go for something that will stick a little better and help you solve your problem

[BALLBREAKER]

my sugestion would be to keep frying the tyres.  After you kill them you can go for something that will stick a little better and help you solve your problem 

<{POST_SNAPBACK}>

I used F6 wheels & then changed them 2 NANKANGS ULTRA SPORT NS 2 & did my best time with these. They came off my XR turbo.

[TRY29T]

Throw on some Mikey T's

GC

[F6 UTE]

My best time on my PDA ( which is a bit more acurate ) is 4.32 seconds on stock Dunlops with ~300 rwkw.

It's all in the pedal control, don't just mash 1st, short change into second @ 4000 rpm and don't mash 2nd. Feather it if you get wheelspin.