Dynowog / Pretzel

[Mr Turbo]

ps guys dont fight over me it aint worth it!

you are right

[Pretzel]

*beep* me....

Try to let people know what the car has produced, and this sort of sh*t happens....

I was not planning on the Clutch to sh*t itself, and I don't want to then just blow the gearbox by putting in a good clutch (Deano mentioned his concerns about the box holding the power the car has when he went for a spin !)

So I am trying to sort out something Clutch/Box wise (Unless someone will lend me one) I mean if as you are all saying the car can't produce the figures we claimed, what do you have to worry about ? I can't damage them now can I ??

But what it will mean once the car has a box etc.. I'm happy to do the comparison JB, but once that's done, I'll be Fcucked if I post any future figures etc.. ! I mean what for ? to be called a liar, and cause Nick to be called a liar as well ? *beep* that for a joke !

To stop all the sh*t, let's say the car only produces 150rwkw, Will you all be happy then ?

Pretzel

[F6_Tornado]

*beep* me....

Try to let people know what the car has produced, and this sort of sh*t happens....

I was not planning on the Clutch to sh*t itself, and I don't want to then just blow the gearbox by putting in a good clutch (Deano mentioned his concerns about the box holding the power the car has when he went for a spin !)

So I am trying to sort out something Clutch/Box wise (Unless someone will lend me one) I mean if as you are all saying the car can't produce the figures we claimed, what do you have to worry about ? I can't damage them now can I ??

But what it will mean once the car has a box etc.. I'm happy to do the comparison JB, but once that's done, I'll be Fcucked if I post any future figures etc.. ! I mean what for ? to be called a liar, and cause Nick to be called a liar as well ? *beep* that for a joke !

To stop all the sh*t, let's say the car only produces 150rwkw, Will you all be happy then ?

Pretzel

<{POST_SNAPBACK}>

Woooooooooooooooooooooooow relax Pretzel

Payback is a b**ch mate and you wait and see some of these snakes crawl back under the rocks at which they came from.. No need to lose the plot over their inability to understand what you are testing here.

Most don’t even have a clue that you’re actually breaking some new ground here and as such it will take time unless you have an endless supply or spare to test with?????

Unfortunately this is/or can be destructive testing and as such it can be 2 steps back to make one large step forward.

I look at it this way>>>>>>>>>>. While you’re taking the gearbox and clutch to a point of destruction you must be making some huge kw gains and although costly they are to be expected none the less.

Keep up the good work mate some of us appreciate the risk and cost that you guyz are putting in this R&D and just ignore the Tosspots that don’t know any better.

Keep us informed mate

[Guest]

Yea Pretzel,sorry for the nonbelivers,"I BELIVE AND HAVE THE FAITH"so just dont bother replying to the handground camers

vik

[Geeseman]

Well said F6_Tornado.

Good luck with the gearbox Pretzel. I hope mine holds together for a few more months at my power level

[axr-jet]

Her we go again. In the red corner etc,etc.

[XRSEX]

just to let you know that ems have never fitted one and that v&e rigoli did xrsexs and its an auto who do you think has done the only manual? that's right me good ol little ol me! I have now done mackas too so ive done the auto too to which is done the same as the manual and is non discriminative it dont care!

So what does this mean Nick.

Are you having a go at me or Vince. Whats the excuse now.

[Lawsy]

I see where gaee is coming from though, its way out of the norm.

Yes, its breaking new ground etc, but its out of the norm so it needs something to be referenced against.

I have a little inkling that I think I know what dynowog is doing to get these huge numbers, hopefully he replies to my PM.

[Guest]

xrsex sorry if you think I was having a go at you I wasnt!

the subject of who to use in sydney has come up heaps of times and I think every reply I have posted has included take it to v&e rigoli so why would I take the mickey out of them or you?

I was just clearing up a post that implied that I did not know what I was doing and stated that it was v&e rigoli that did the initial r&d and that they should take credit for that also stating that I did the first manual and that the auto was the same in wiring! that's all read it properly and you will see my intentions I consider you a friend and I never burn those that do the right thing by me!!!

[XRSEX]

xrsex sorry if you think I was having a go at you I wasnt!

the subject of who to use in sydney has come up heaps of times and I think every reply I have posted has included take it to v&e rigoli so why would I take the mickey out of them or you?

I was just clearing up a post that implied that I did not know what I was doing and stated that it was v&e rigoli that did the initial r&d and that they should take credit for that also stating that I did the first manual and that the auto was the same in wiring! that's all read it properly and you will see my intentions I consider you a friend and I never burn those that do the right thing by me!!!

<{POST_SNAPBACK}>

Cool Nick!.....

No probs here mate!....

Just remember we are on the same team.