Does APS Sell Valve springs

[badxr6]

hi geea I think you should replace your valve springs you wont beleive the diffrence

[IM2QIK]

Thanks for your reply Peter,

Please let us know when you have Valve Springs for sale

Thanks

[aps]

Thanks for your reply Peter,

Please let us know when you have Valve Springs for sale

Thanks

NO problem I will post when we have decided on the final spec of the APS valve spring and also post the price.

Thanks

Peter

[HUSTLER]

Been waiting for the valve springs for a while now, I wanted to get mine done with phase ii but they were unavialiable.

How many KW rise on avg should we expect to see? around about 10?

Is there guna be a tool that we can lend to get them done?

[badxr6]

you will get more than that also engine revs nicer and there is a tool to do the job

[cdm]

you will get more than that also engine revs nicer and there is a tool to do the job

Is the increase in power just with the valve springs fitted or would this require a retune of the chip? If so, how many $$$.

Cheers,

Chris.

[badxr6]

:o :o :o yes it does and you should retune the chip to get max performace if that's what you are trying to acheive

[HUSTLER]

Can someone even give a ballpark figure for how much the valve springs are by themselves, without any labour??

Im gathering we are probly paying alot more in labour then what the valves are even worth??

Im guessing around 350 for the springs???

ANd rest in labour??

Or am I way off?

Edited 28/04/04 01:23 PM by HUSTLER

[ktford]

Can someone even give a ballpark figure for how much the valve springs are by themselves, without any labour??

Im gathering we are probly paying alot more in labour then what the valves are even worth??

Im guessing around 350 for the springs???

ANd rest in labour??

Or am I way off?

you could always use XR8 springs, about $210 a set but there's a delay on them to.

Scotty CCC

[geea]

Can someone even give a ballpark figure for how much the valve springs are by themselves, without any labour??

Im gathering we are probly paying alot more in labour then what the valves are even worth??

Im guessing around 350 for the springs???

ANd rest in labour??

Or am I way off?

you could always use XR8 springs, about $210 a set but there's a delay on them to.

Scotty CCC

Do the XR8 springs fit straight in, Scotty? How long would it take a decent workshop to fit a set of springs?

Geea.