BlackXR6T

cruise was good, muzza took out the 6cyl forced induction comp. Got a nice dynoqueen throphey. Dat got the lucky door prize, but missed out CAUSE HE WASNT THERE!!! dont worry the union boys will look after us, things are getting better

sounds good half an hour wont make much of a difference

sounds good. I have no problem waiting to 9:30 to wait for the sydney cruise to meet up, then we'll head to singleton

We were meeting at 9am at the BP. Heading to Singleton Show and shine. You can rock up on the day and enter. $15 to enter your car into the show and shine $50 to enter your car on the dyno. Dyno Runs from 9am to 2pm Below is a link to the entry form. http://singletonstreetmachines.com.au/uplo...ryform_2007.pdf Looks like its going to be a good cruise/show

im not sure on numbers but there is a few of us. Im going up and correct me if im wrong at this stage dat40l, our06t, muzza, mickey gee are going and maybe starkers and white weapon. Have I missed anyone.

when you get to the end of the freeway coming from central coast you come to a round about. At the round about turn right to head towards newcastle. When you come off the round about the BP/Hungry Jacks is a couple hundred meters on the left. Im going to enter mine in the dyno on the day.

good stuff, hope to see you there. Got some more info on the show. You can enter on the day you don't have to pre enter, no extra cost for entering on the day. but if you prenter you get bonuses. The dyno will run on sunday from 9am to 2pm

I think Im up for a run

are we just gona have the one meeting point or the guys in newy just meeting at berro/thornton. what time do we want to head to singo, it will take approx. 35 -45 min to get to singleton. Maybe 8am at berro/thornton?? Its $15 entry to the show for you and your car. and $50 for the dyno

I was just on Fordmods website, a few people from there are heading to singo show and shine, maybe could organise to cruise down together. I posted it up in there forum, waiting to see what they say

OK Singo show and shine sounds the go on the 25th of November. Should we arrange a place and time, any ideas to meet and cruise up maybe 2 places to meet one at newcastle the other at Thornton Maccas on the way for the Maitland people. White Weapon Mal Wood were doing new and reco conversion kits for new $5845 reco $4885 depending on availability I think. There is a link to the subject below http://www.fordxr6turbo.com/forum/index.ph...mp;#entry589236

Just to throw something else into the mix. the singleton show and shine is on the 24th and 25th of November. There is Dyno comp grass events, sound off and show and shine. the entry to the show is $15 and $50 for the dyno comp. below is a link to the entry form http://singletonstreetmachines.com.au/uplo...ryform_2007.pdf Anyone interested in this?

Hey everyone here is the flyer for that car show on November 25. The one at Nov sounds good. Anymore detail, links or anything?

Hey everyone, just found out about an All Ford Day at Koala Park Doyalson Munmorah State Power Station it says open to all fords its on the 25th of November $15 pre entry $20 on the day I got a flyer and im to lazy to scan it at the moment but I'll do it soon. I'm pretty keen to enter and have a look. Anyone else interested

that's crap dat. hope your back on the road soon.

I had this problem 2 days ago. mine was a T-Piece that came undone, under the passanger side plastic cover below your windscreen wipers. All you need is a phillips head screw driver to undo the cover and just lift up the rubber seal and push it back into the T-Piece. Hope it helps

that sounds good. Muzz, you wanna meet at thornton maccas at 10 or 10:10am. Anyone else who wants to go from there to Hexham?

Tomago Show and Shine Car show ran by the GT club of Newcsatle is coming up on the 19/8/2007. Previous years its been a good show. Just wondering if we should organise a cruise there? here is a link http://www.fpvclub.com/documents/Club%20To...lyer%202007.doc I think the ford forums fellas are heading too. http://www.fordforums.com.au/showthread.ph...age=1&pp=25 Any ideas of locations

that's no good dat, we will have to push you to the next cruise in a wheel chair

Tomago Show and Shine Car show ran by the GT club of Newcsatle is coming up on the 19/8/2007. Previous years its been a good show. Just wondering if we should organise a cruise there? here is a link http://www.fpvclub.com/documents/Club%20To...lyer%202007.doc I think the ford forums fellas are heading too. http://www.fordforums.com.au/showthread.ph...age=1&pp=25 Any ideas of locations

I up for the cruise on saterday nite to kk's sounds like a good trip

just wanting to clear some things up on a install for my car(sedan XR6T). Its got premium sound standard. I am relocating the battery to the boot and installing a fake wall behind the seat. In this wall I am going to mount an Alpine R 12" sub powered off a more powerful amp in the factory location. Then Im installing 5x7 (probably alpine) speakers in the parcel and the front doors. all ran through a 4 channel amp next to the battery. I am planning to mount a dvd player next to the "power source(cig. lighter)" do they fit without having to remove the socket? I need a dvd player with *1x din size *1x dvd RCA out ( to go to a converter then to the ICC with a switch for video overlay/ AC controls) *1x audio RCA in ( to get the radio signal from the ICC use factory amp RCA) *2x audio RCA out ( to run the 2 amps) Remote wires for amps will come off new dvd player or cig lighter 12v 12v (yellow) constant will come from battery or behind dash(mobile kit). has anyone done anything similar with this? any problems im not seeing. any advice. Pictures would be greatly appreciated

Good work muzza, now just don't break anything! should be good when you get the pistons and rods in

good work, glad to see she got into the 11's. Did you put the booster seat in the back or did you take it out for the run? Should be good when you get some more stuff done

I just went out and had a look at the "tyre placard" and it states 17" and 18" optional. So do you go off the 17" or 18" as the point you can go 2" bigger?