jaysevu
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Articles
Media Demo
Everything posted by jaysevu
-
Changing Front Springs And Shocks To Stock
jaysevu replied to hardcore's topic in Suspension and Handling
so the rears of a bf should be fine to remove and install without a compressor? im attempting this tomorow. -
Hey mate, sent you a pm
-
Do you have to block up the cross over once the pipe from the turbo is removed or can you leave it open?
-
Buy my bf turbo
-
How do you run an intake pipe off the turbo using the crossover and standard cooler?
-
not sure yet, thinking of getting just a sh*tty daily and getting a xr-xt fairmont as the toy
-
heres my bf xr6t , currently for sale!
-
Lhs Wheel Sits Further In And Further Forward Then Rhs Wheel
jaysevu replied to jaysevu's topic in General Tech
Thanks for the info mate. The car doesn't pull to one side or anything so I guess I can deal with it... Ita probably just cambered in more so I'll deal with the uneven tyre wear. -
Lhs Wheel Sits Further In And Further Forward Then Rhs Wheel
jaysevu replied to jaysevu's topic in General Tech
Nah I didn't get a copy of the results but I might take it back to get another one done. It was fairly low - almost tucking a 20" rim but I've raised it 10mm now -
As stated my LHS wheel sits further in and further forward then RHS wheel at the front of my bf xr6. I'm running coilovers and I had it aligned when they were installed so I don't know what the problem is. I'm not sure if it was like this before the coilovers as I've only just noticed it but it's quite obvious now. LHS sits about 12mm deeper. Could it be a bent control arm or something like that?
-
Does this apply to the front of fords aswell as the left side of my rim sits further in and further forward on my bf.. Ideas?
-
I found them on eBay brand new but the guy wanted like 500 for them.
-
Ive got a set of avantek rims if your interested? Check my for sale thread or I could text you some pics. They have abit of black and silver n they have done dish too so you might like them
-
Look on nissansilvia.com , Contact a forum member called streeter. He can import pretty much any part you want. Or there could be some floating around in the for sale section
-
sorry to ask here but dont really know where else to ask. Will a 15x7 -6 offset steelie fit a bf with pbr breaks all round?
-
What size of of those sunaysias is ideal for a bf.. Offset too?
-
No on both front and rear? What about with a 5 or 8mm slip on?
-
Will the 16" stockies fit on a bf with pbr breaks?
-
Does anyone know if 15" ford interceptors fit on a bf with the pbr breaks?
-
A turbo car wont have extractors ..
-
looks good mate, perfect fitment. What suspension set up are you running?
-
Rota Wheels, Who's Got Them And What Size's Ba-Bf
jaysevu replied to smXR6's topic in Wheels and Tyres
What springs are on that red BA? -
turns out I was wrong, it was making 297rwkw on 14psi and is now running 16psi but no dyno figure has been recorded so he sais? Is 16 psi abit high for the ba engine?
-
Yeah I'd think coming from herrod it would be a decent tune. The cars manual and 65000k's
-
Hey guys, looking to buy an xr6t and I checked out one today. It has a few mods done, Full twin 2.5" exhaust, Fuel pump, Front mount (stock piping though), intake, injectors, valve springs. It had a dyno sheet done by herrod motorsports showing 270 rwkw at 14psi. Is this abit low for the mods? or could the standard intercooler piping be holding it back?
