MeatWod

Mmm cooled down a bit last night to 24deg was much more fun I think ill havta get it dynod on a cool day, does anyone know how much of a difference it makes roughly?

Yeah thanks, very fun to drive :D It's an auto, was tuned by rob/brett at #####. Was tuned on a 41deg day thou so im pretty happy with the power considering the heat :D Tyres seem to cope better then I thought they would aswell, toyo t1r's holding up pretty well at this stage, see what happens when it cools down thou haha

Well after being a member for some time now finally did some work to my car fairly happy with the result 350.3 Mods: 4" SMB exhaust from dump all the way to a 4.5" tip 60lb squirters 341 pump rapid systems v3.5 kit ported turbo with 12psi acctuator custom tune

just finished installing my rapids v3.5 kit and did the angel eyes while I was at it, not very happy with my front bumper thou, I think I might have to trim a bit out as its hitting the pipework on the cold side but it dosnt look like there is much I can do about it, already spent plenty of time playing around with it. Other then that wrapped with it! dropping it off for a tune on monday

haha all sorted now, thanks for the replys! chris told me what to do also, I had connected the black hose to my factory boost gauge sender unit but I just went and got a T piece and its all good now, thanks for the replys!

Hey nearly finished installing my new rapid 3.5 kit and found a wire on the harness which I hadn't plugged in, it goes into the sensor on the cold side bolts into the metal pipe and has 3 pins, what is this and do I need it? and where do I put it now as I cant see anywhere on the rapid kit to put it??

Thanks alot for the pics/replys got it in nice and centerd now! sure didnt like doing the bending thou haha.

does anybody have any pics of this? I want to see how far im able to bend them without hopefully snapping/breaking them... I bent them out towards the front bumper but dosnt really give me much room to center the cooler, after abit of searching I read im ment to bend them in towards the radiator?

Yeah ive both cracked the rubber coupling, and snapped the clamp nipping it up, was far from "tight" Quality products!

I'd be keen on a group installation, going back to work for 2 weeks thou on monday so wont be free untill the 13th :(

very nice steve, wanna do mine :D??

Doesn't look half as good as MrBeans! wish I had the skills to copy his

Electronic rust protection id imagine

Maybe you learn from yours and then do mine :D ?

who knows

That'd be my old lady

Think I remember reading somewhere that the bf mkII has the rspec suspension the shocks are 2" shorter then the standard BF ones or something

What one converter did you end up using?

Ordered mine from here http://www.starlitegaming.com/Parts_and_Ac...Converters.html looks like the same one linked on convertors.tv but I haven't received it yet, the guy said he was busy on holidays so took him a while to ship it, can let you know when and if I get it Shipping was 37USD so a total of $122usd shipped.

ops bought mine from http://shop.ebay.com.au/merchant/cnx00x cnx here on the forums, cant edit first post D:

I bought one off him, and it required no mods at all!!, I just have the glass sitting in front of the screen, doesn't move about at all, haven't got my carputer working yet still waiting on VGA to CGA converter but I have tested the touch panel and seems to work like a charm, I couldn't seen to get it working under windows vista 64bit, but my carpc is windows xp anyway and it works fine on that. Cant notice much of a visibility difference with the overlay in there either, but I haven't been out driving in the sun yet, but so far so good. Thanks cnx!

Never mind.... turns out my heater core must be leaking, coolant everywhere, and is drying up on the heater core causing the terrible smell.

Hey all, just bought the ford axillary input booster kit, installed it yesterday, and it all works good, no whine etc nice and loud. But I noticed a smell so turned it off in fear of burning stuff. Thought it may have just been co-incidence but ive had it on and off a few times, and you can defiantly notice a new smell when you turn it on after a minute or to, ICC volume on about 15. Pretty sure I installed it right, would be pretty hard to get 2 plugs wrong that only fit in the designated sockets(have re socketed them to make sure still no difference). So has anyone else experienced it and what do people recommend I do? ive felt the box/most of the loom I can reach while its on and nothing is even slightly warm, so its not that burning, well maybe inside the box. But ive normally found with electronics if you smell a bad smell 99% of the time its to late and something is fried, ive had this on about 5 times for up to 5 minutes and its still working and sounding fine. Maybe just a paint or a glue/sticker inside the box getting warm perhaps? any ideas? Source is my n95 on headphone mode at 100% volume

Could you recommend one? and where I could buy it?, can't find anything on ebay :(

Yeah saving for a house would be the smart thing to do, with the 21k new home builders grant atm as well, but it just seems to hard for me atm, I have a sh*t job, it pays well but I hate it. Trying to get an apprenticeship for next year, ill do that for 4 years then hopefully have a trade and decent income then put it all towards a house.