jas98 Member 1,029 Member For: 11y 9m 4d Gender: Male Location: Maryborough Qld Posted 03/12/23 06:23 AM Share Posted 03/12/23 06:23 AM Ona ba xr6turbo the valve control solenoids. If these are playing up can they not set a code? Basically I replaced the solenoids last year with new fuelmiser ones which are ultrtech branded. Lately the idle seems to a bit rougher(not missing ) exhaust bote seems a bit veafier aswell at idle ..like a very very very mild cam ..also sometime it seems a bit underpowered to other times the car. Not to mention fuel usage is high...but everything seems ok. Sooo want to eliminate these as being an issue. How do I check these in forscan? Can I see what there doing? Wat should it read at idle? Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,133 Member For: 9y 2m 29d Gender: Male Location: South Australia Posted 03/12/23 11:44 PM Share Posted 03/12/23 11:44 PM A code will be logged if the timing is too far retarded or advanced. In Forscan go into "read pid data", type vct into the search bar and log the cam error. You want less than 2 degrees of cam error ideally. The cams should move around a little bit at idle, if they are stuck at -10 and aren't moving at all the phaser is stuck and will need pulling apart to free up the locking pin. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now