jonweb14 Member 33 Member For: 8y 3m 9d Posted 26/02/17 07:25 AM Share Posted 26/02/17 07:25 AM Hey guys so just installed a pod into my stock airbox. Had the pod in with a bend pipe sitting in airbox without the lid then realise the bend can fit snug into the existing hole in lid and fits perfectly , would this be classified as a cold air intake? Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/ Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,440 Member For: 15y 5m 7d Gender: Male Location: Melbourne Posted 26/02/17 07:34 AM Share Posted 26/02/17 07:34 AM dunno will prob flow the same as the stock ford one if all standard tune hhaha Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632877 Share on other sites More sharing options...
jonweb14 Member 33 Member For: 8y 3m 9d Posted 26/02/17 07:35 AM Author Share Posted 26/02/17 07:35 AM Oh true hha well I got told be previous owner that it had been tubed by owner before him but yeah idk. Anyone could just say that haha Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632878 Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,440 Member For: 15y 5m 7d Gender: Male Location: Melbourne Posted 26/02/17 07:38 AM Share Posted 26/02/17 07:38 AM you should double check the info from previous owner if tuned and who by etc. and get it checked. Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632880 Share on other sites More sharing options...
jonweb14 Member 33 Member For: 8y 3m 9d Posted 26/02/17 07:40 AM Author Share Posted 26/02/17 07:40 AM Yeah. Can mechanics check on there computer if it has been tuned? I was going to just get a dyno test done on it, is it worth it? Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632881 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,525 Member For: 17y 1m 22d Gender: Male Location: Melbourne Posted 26/02/17 07:45 AM Share Posted 26/02/17 07:45 AM always worth running it up on a dyno if you want to know how well it's currently running Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632883 Share on other sites More sharing options...
jonweb14 Member 33 Member For: 8y 3m 9d Posted 26/02/17 07:46 AM Author Share Posted 26/02/17 07:46 AM Yeah, how much would that be? Couple hundred? Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632884 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,525 Member For: 17y 1m 22d Gender: Male Location: Melbourne Posted 26/02/17 07:46 AM Share Posted 26/02/17 07:46 AM anywhere from $80-$200+ Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632885 Share on other sites More sharing options...
jonweb14 Member 33 Member For: 8y 3m 9d Posted 26/02/17 07:59 AM Author Share Posted 26/02/17 07:59 AM Ohkay sweet. Thanks mate. Another thing, my saas boost gague has power to it but needle does not move.. it is all hooked up fine, what could be the problem? Faulty actuator? Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632889 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,525 Member For: 17y 1m 22d Gender: Male Location: Melbourne Posted 26/02/17 08:04 AM Share Posted 26/02/17 08:04 AM Is it mechanical or electrical? If it's mechanical, then it needs a boost reference hose. Connect it to a t-piece to where the BOV gets its vacuum source. If it's electrical, you'll need to connect the sensor to a vacuum source (same as above) and make sure it's wired back to the gauge correctly. Link to comment https://www.fordxr6turbo.com/forum/topic/92968-cold-air-intake/#findComment-1632890 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now