Stalling Problems

[Guest beloyg]

I would suspect it would be B29 but ring the dealer and ask to make sure.

[Guest beloyg]

[QMy new XL SE Manual ute stalls all the time when pulling up at lights hot and cold revs also go up and down from 750-250 untill it stalls.

"Is the B30 Update only for XR6T or does it also apply to poverty pack ford utes?"

ALSO does anyone have a shudder on take off? mine is very bad. FORD in the Northen Teritory says its a ford thing but I do not beleve them.

are you talking about shudder as you are engaging clutch or after clutch is engaged.as for B30 it is for the whole range

[ktford]

Fordtech,

I had the new PCM calibrations done on Feb 25 after getting the Office of Fair Trading involved. My concern is that the calibration may not be the most current (B30), since you have indicated that the disks have only just been issued to dealers.

Do you think I should get it re-done?

Thanks.

Strewth that sounds interesting

Scotty

[Gareth]

When I had my APS II kit fitted C&V found a problem with a return fuel line valve in the fuel tank.

Prior to them finding this the car stalled constantly (sometimes 3 or 4 times a day). Had this fixed (disconnected the valve) and have not stalled since!

[slapnut]

Dec 2002 manual coming up to 30,000 and has started stalling regularly in traffic. Usually when slowing down. I'll see what they say at the next service.

[ktford]

When I had my APS II kit fitted C&V found a problem with a return fuel line valve in the fuel tank.

Prior to them finding this the car stalled constantly (sometimes 3 or 4 times a day). Had this fixed (disconnected the valve) and have not stalled since!

Very interesting, many people checking this soon I bet.

Scotty

[IM2QIK]

Hey Gareth,

Did C&V pull the fuel tank out to disconnect the return fuel line valve? What is this valves purpose if its not needed and just causes problems???

Does anyone know C&V's phone# ????

[jimmyboy]

I had the lattest pcu updates installed today, drove the long way home and no stalling as yet, the car would at least had a rough idle on slow down by now, but nothing- seems to be running smooth. fingers crossed

jimmy

[FORDTECH]

Fordtech,

I had the new PCM calibrations done on Feb 25 after getting the Office of Fair Trading involved. My concern is that the calibration may not be the most current (B30), since you have indicated that the disks have only just been issued to dealers.

Do you think I should get it re-done?

Thanks.

Yes.Just to be sure.

The software level they would have used would be B29.3. Apparently under extreme circumstances(such as yours) the disc's were issued to a select few dealers.

Sorry about the late reply.Been at Clipsal watching Marcos mopping the track with the Expensive Daewoo boys.

[Guest rabbit]

Fordtech,

I had the new PCM calibrations done on Feb 25 after getting the Office of Fair Trading involved. My concern is that the calibration may not be the most current (B30), since you have indicated that the disks have only just been issued to dealers.

Do you think I should get it re-done?

Thanks.

Yes.Just to be sure.

The software level they would have used would be B29.3. Apparently under extreme circumstances(such as yours) the disc's were issued to a select few dealers.

Sorry about the late reply.Been at Clipsal watching Marcos mopping the track with the Expensive Daewoo boys.

thanks Fordtech