Jump to content

Recommended Posts

  • New Member
  • Member For: 10y 7m 1d
  • Gender: Male
  • Location: Sydney
Posted

Hi guys, weve recently swapped in a low km bf typhoon motor into my ba ute keeping existing wiring harness and computer, I rang up Joe at CMS and he said everything will just swap straight over and run fine, but it started up for 15seconds then died, and now nothing, there are no fault codes coming up on the diagnostics. Any ideas?

  • Legacy Donating Member
  • Member For: 19y 5m 24d
  • Gender: Male
  • Location: perth w.a
Posted

Plenty of fuel, not being smart but if it kicked over, ran then stopped maybe a fuel line is plumbed incorrect? 

Or is it dead ded, like no power?

  • Member
  • Member For: 19y 4m 23d
  • Gender: Male
  • Location: ACT
Posted

Check the wire / plug on the Crankshaft Sensor ?? Right side on engine next to aircon-compressor.

  • Like 1
  • New Member
  • Member For: 10y 7m 1d
  • Gender: Male
  • Location: Sydney
Posted

everyone is saying fuel pressure or lines, that's what I thought, cause essentially there the same engine, it just run and start np!

 

  • New Member
  • Member For: 10y 7m 1d
  • Gender: Male
  • Location: Sydney
Posted

its all running beautiful! For some reason the car didnt like the bf throttlebody and injectors from the f6, we put all my old fuelrail injectors tb and everything on and its cranked and drove first go! car is like brand new! next stop will be off to CMS for a general checkover! So happy!

  • Like 2
  • New Member
  • Member For: 10y 7m 1d
  • Gender: Male
  • Location: Sydney
Posted

they were blue, the ba ones were black and look like bigger squirters

  • Legacy Donating Member
  • Member For: 19y 5m 24d
  • Gender: Male
  • Location: perth w.a
Posted

Blue injectors would be leading me to think they were FG F6 injectors

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 24d
  • Gender: Male
  • Location: Perth
Posted

Sounds like your car had been tuned for aftermarket injectors and you swapped in a  set of stock injectors 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...