Offset/rim/stance Advice

[g6eturbogoodness]

Gday

Im looking at getting a set of Work GNOSIS HS202's. 20" 9.5 on the front and 10.5 on the rear any idea what offset ill need? and even how to figure it out? I know ill need to get my guards rolled. At the moment iv just got lowered springs but ill get coilovers to give me more adjustment. I also wanna run stretched rubber.

Thanks

[Bellato]

Depends what look you want. With the rears your best bet is +35 as this will be as close as you can get in the guards and will still poke a fraction. With a 275 and the caber of lowering the car should work.

As for the front all depends what look you want. Generally a 9.5+25 with a 245 should work and stretch will match the rear

[Spyathe]

9.5 +27 on the front is probably the absolute limit unless you're running spacers

10.5 +35 on the rear will probably hit things (not 100% though)

This is a 9.5 +35 with an 8mm spacer

Edited 11/05/14 10:52 AM by Spyathe

[Spyathe]

Edit: I just noticed you have a G6e so you should probably disregard everything I have said lol