BOSSGTE Member 56 Member For: 12y 6m 21d Gender: Male Location: Melbourne Posted 14/01/13 11:16 AM Share Posted 14/01/13 11:16 AM Hi guys,Forgive me if this has been covered previously, but I couldnt find the answers anywhere on here.I want to change all of my interior lights to white LED, but I'm hoping someone has a list of all the types of globes I need so I dont go pulling the car apart unnecessarily.There are:2 x Vanity mirror lights2 x Front Door lights4 x Roof mounted map reading lights1 x Rear light above drive shaft tunnelDoes anybody know what types of globes these are? Any tips of removing the roof mount lenses?Thanks in advance. Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/ Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 10m 29d Gender: Male Location: South West QLD Posted 14/01/13 11:38 AM Share Posted 14/01/13 11:38 AM Can't remember the globes.. But there is an eBay seller who can give you perfect fit ones for the FG..Use a flat head screwdriver to pop out the roof ones.. I wrapped the end with a bit of glad wrap so it didn't scratch anything. Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349402 Share on other sites More sharing options...
#96 Member 281 Member For: 12y 7m 5d Posted 14/01/13 11:59 AM Share Posted 14/01/13 11:59 AM Type w5w led into eBay.Look for the ones with 6 or more leds, facing all directions so that it uses the reflectors and isn't so unidirectional.That's for the 4 roof lights anyway. Oh yeah, insert the screw driver on the side towards the centre of the car, and centred in the cover from front to back.Can't help with the other ones, pov pack for me.(dont forget the one in the boot) Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349418 Share on other sites More sharing options...
#96 Member 281 Member For: 12y 7m 5d Posted 14/01/13 12:00 PM Share Posted 14/01/13 12:00 PM While I'm here... Anyone know how (or even if) you can change the colour of the ring around the key? Stands out like dogs balls. Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349419 Share on other sites More sharing options...
GeGe6 Donating Members 1,980 Member For: 12y 11m 23d Gender: Male Location: Perth, SOR Posted 14/01/13 01:25 PM Share Posted 14/01/13 01:25 PM (edited) The LED's you are chasing for map lights are BA9S T4W 5SMD LED's (x3). I think there is one in the glove box also. You will need to reverse the wiring polarity on the glove box fitting. The ones in the doors are 36mm festoon globes (x2) and the one in the rear center floor and boot are 42mm festoon. (x2) You will also need some 5SMD T10 W5W 5050. Don't forget one under dash on driver side foot well.(x5) Buy more then you require as a couple extra is always good. Search for them on EBay from china sooo much cheaper for the same product. If you find a way to do the key hole post it up as only one I have not done. Edited 14/01/13 01:29 PM by GeGe6 Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349444 Share on other sites More sharing options...
egoxr6tute Donating Members 56 Member For: 14y 1d Gender: Male Location: Townsville Posted 15/01/13 06:55 AM Share Posted 15/01/13 06:55 AM (edited) The bulb for drivers footwell is obscured by the fuse cover. if you want more light cut the plastic out of the way with a hacksaw blade.Makes a big difference. Edited 15/01/13 06:58 AM by egoxr6tute Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349746 Share on other sites More sharing options...
#96 Member 281 Member For: 12y 7m 5d Posted 15/01/13 03:52 PM Share Posted 15/01/13 03:52 PM Took the cover off of the steering column this arvo.Seems the light is a tiny incandescent bulb, soldered onto a circuit board, which at a guess, is the immobilser. I'd rather not mess with that.Ford 1: 96 0 Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1349885 Share on other sites More sharing options...
LUCASZ Member 49 Member For: 15y 1m 26d Gender: Male Location: Box Hill, VIC Posted 10/08/13 05:14 AM Share Posted 10/08/13 05:14 AM Hi guys,Forgive me if this has been covered previously, but I couldnt find the answers anywhere on here.I want to change all of my interior lights to white LED, but I'm hoping someone has a list of all the types of globes I need so I dont go pulling the car apart unnecessarily.There are:2 x Vanity mirror lights2 x Front Door lights4 x Roof mounted map reading lights1 x Rear light above drive shaft tunnelDoes anybody know what types of globes these are? Any tips of removing the roof mount lenses?Thanks in advance.Any pictures with them in yet? Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1414528 Share on other sites More sharing options...
dragons90 Member 42 Member For: 17y 28d Gender: Male Posted 10/08/13 06:51 AM Share Posted 10/08/13 06:51 AM Here's a link to the ignition barrel on ford forums http://www.fordforums.com.au/showthread.php?t=11322885&highlight=led+ignition+barreland interior http://www.fordforums.com.au/showthread.php?t=11300183&highlight=fg+interior+light&page=1 Link to comment https://www.fordxr6turbo.com/forum/topic/83579-fg-interior-lighting/#findComment-1414543 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now