Guys after some feedback on a couple of Sydney based northwest tuners

Mrc in castle hill and hills motorsports in Hornsby. Looking to get an sct flash tune and was after some results from these guys on and fg xr6 turbo

I know the guy who runs MRC, Mark Chapman, he is a straight shooter, tells you how it is and does a good job, he has tuned a number of friends cars and done a very good job. I can't say as much for Hills, but I have heard some very very bad stories, have a quick google search for hills and read the horror stories. If they are the same mob (name change) that tuned my VL back in the day I would avoid them at all costs. MRC have a very good reputation and Mark has been around for a long time. Give him a call and have a chat.

If you must have it done in the north west, Autotech at Granville would be my pick

or check the advertisers forums for Sydney tuners as all have plenty of experience,

and well worth the drive.

Personally I would avoid Intune at Castle Hill

intune are in sevenhills and yep avoid avoid avoid. MRC do a good job, if you must stay in North west go to them, if you got range go see Autotech, think they are site sponsors.

Thanks guys that's great feedback appreciated, does anyone have a Dyno sheet from mrc? For an fg xr6 t? With nothing but tune?

Ps - is everyone's fg an utter nightmare in the wet? Uncontrollable oversteer on light throttle?

Anyone had any work done by castle hill exhausts? Seem very cheap?

Yep had all the tuning work done on my car by Castlehill Exhaust as well as the exhaust install, made 400kw ATW, Dale the tuner there is pretty good, he had a run in here a while back, but from my personal experience all was good, Both Dale the tuner and Chris the exhaust fabricator and all rounder/mechanic/engine builder are good blokes and easy to talk to. With regards to oversteer in the wet, yes that is normal, try less throttle or better tyres. I have had 2 tunes done by Castle hill exhaust and my only complaint is I paid twice when I should have waited done all the mods then did the tune once.

+1 for castle hill exhaust/performance. Had a few mates go there and they have had nothing bad to say, I'll be booking in for a tune in a few weeks time

If you want a tune like this dyno sheet feel free to go visit dale, he will give you power! I have 21 psi on a ba engine! Mad hey!

Then went straight to Autotech in Granville and had a retune because 21psi was just plain stupid!

17psi!

Castle hill is cheaper and you do get what you pay for! If you need a new exhaust go there that's the specialty.

Thanks all that's great info, had my ba tuned by Spyro and it was an absolute jet! , I'm putting the xr8 air box and snorkel into the fg tonight , then will look at the injectors , dump pipe, cat and sct tune. Hoping for 300rwkw