Time For Some Help

[Wenier]

As Jet said undo the internal gearbox bolts and check you can turn the engine over on its own. This way you know whether the engine or the gearbox is causing the jam.

[Azid]

Bionic the him module is the big flat air con module behind the glove box? Someone mentioned that I didn't change it that's bout only thing that I left from 6 speed shell. Would air con module stop it starting?

[bionicxr6t05]

Yep, needs to be reprogrammed to your vin

[XR6menace]

The transmission sounds like an issue...

Is it manual or auto??

[Azid]

So that can stop car from starting even though it's an air con module? Do ford reprogram them?

[bionicxr6t05]

Yes because it is on the high speed CANBUS and yes ford can program it, you will need to tow it too them

[Azid]

menace it is an auto, bionic my mate was asking me if mechanics have the programs to do it or ford is the only ones that can reprogram it?

[bionicxr6t05]

No only ford

[citric_XR6Turbo]

So that can stop car from starting even though it's an air con module? Do ford reprogram them?

were are you from mate ?

Edited 30/08/12 10:02 AM by citric_XR6Turbo

[citric_XR6Turbo]

Yes because it is on the high speed CANBUS and yes ford can program it, you will need to tow it too them

The him module does not need to be programmed for the car to start even if it's not plugged in the car will still start.

I've had dash's just sitting in the car with only the kick panel plugs and "BEM" plugged in and I was still able to move the car off the hoist . It thew alot of coeds but still drives mate .

And it sounds like you have a big issue inside the motor from the impact man. You should be able to turn it over with a 1/2 inch breaker bar with ease man being a turbo motor .