Xr6 Trans Build

[Jamus]

Okay so I'm looking at building my 4speed in my BA xr6 turbo to handle around 400rw max,

Iv talked to mv automatics in Adelaide and they have said they don't warranty any higher than 350rw rated, he has said that they have had plenty of people run higher power with that build,

It's gonna cost $2800 for the bulls plus my postage of the trans to them

So does the price sound good?

Has anyone ever used mv autos in Adelaide or do you suggest anyone else in Adelaide?

and just any other suggestions ie. what stall should I get and stuff

Thanks

[Mr_4.0]

Find out what work the actually do?

Not all builds are the same.

My pick for a stall woud be a 9.5 inch dominator 2800rpm.

[rbjet]

$2800 seems pretty cheap if that includes a stall. If not then sounds like a pretty good price to me.

[Jamus]

Well he said that's full built and ready for 350rw gaurenteed, and that includes the high stall an he mentioned bands etc I didn't go to much into detail cos tbh I have no clue how the inside f a auto trans works

[Mr_4.0]

That's way to cheap including a stall.

Get a list of what's don. And post it up. It's way too cheap.

[rbjet]

Was thinking the same thing. Sound like just a freshen up with new bands and a service if that includes a stall.

[Jamus]

well that's not including labor I think he said $3200 with, ill needa ask everything his gonna do and post it up

[ebxmple]

Dont forget a trans cooler aswell..And maybe a strengthened driveplate whilst your there too.

[xr6t_ute]

Trans cooler is a 100% a must.Also ask him is he putting Au planateries and Au pump, as the Au are a better product instead of the Ba ones, and is the valve body going to be modified, better yet ask him what exactly is going in the box, and tick off any things his doing with what I just mentioned.

[Mr_4.0]

Also must have billet servo!