Jump to content

Recommended Posts

  • Member
  • Member For: 18y 1m 6d
  • Gender: Male
  • Location: NSW
Posted

WAS THINKING OF GOING WITH ID 1000CC INJECTORS WHAT ARE PEOPLES THOUGHTS ON THEM WHAT BUCK WILL THEY COST?

  • Legacy Donating Member
  • Member For: 18y 5m 6d
  • Gender: Male
  • Location: Melbourne, S.E
Posted

they cost $125/$130 per injector plus u will need height adaptors $15 per injector, as the injector size is 3/4 and is a shorter injector, also u will need wire adaptor plug $20ea (per injector) to suit the injector factory wiring harness. as they are different size to standard. add all that up not so cheap mate.

if u look in my classifieds section (car parts: top of page 2) I am selling the lot for only $650

just a reminder they are genuine id1000's (injector dynamics). not the style id 1000's that are selling on fleebay.

  • Legacy Donating Member
  • Member For: 17y 9m 29d
  • Gender: Male
Posted (edited)

Ummmm wiring adaptors for $20ea! Man buy from the states, I paid $3ea for the same thing they are selling here.

Edited by Dillz
Don't need to quote the post above
  • Like 1
  • Legacy Donating Member
  • Member For: 16y
Posted

got a set in my FG, cannot complain, plenty of space to run E85 and are tuneable down to great idle. +1 on the ebay injector adaptors I paid something around that mark $3-5 per adapter.Buy Phantom 6's injectors that's cheap for a set of ID1000's genuine !!

  • Legacy Donating Member
  • Member For: 17y 9m 4d
  • Gender: Male
  • Location: sydney
Posted

mate, I got ID 2000,my car idles like a stock engine, quiet and smoth, thanks CRESCENT MOTORSPORT, you guys rock

  • Like 1
  • Member
  • Member For: 18y 1m 6d
  • Gender: Male
  • Location: NSW
Posted

thanks guys will go with the ID1000cc injectors

  • 1 month later...
  • Legacy Donating Member
  • Member For: 18y 2m 26d
  • Gender: Male
  • Location: Sydney
Posted

Just to confirm, for the FG the 3/4 48mm length is required below?

post-16087-0-52079800-1321667285_thumb.j

The ones I always see are the purple 60mm ones below.

Been told they can be fitted to FG, but require spacers. Not keen on this.

post-16087-0-39246800-1321667390_thumb.j

So to confirm, the 48-14's are the way to go withe the correct EV1 adapters for an FGXR6T?

  • Member
  • Member For: 20y 3m 24d
  • Gender: Male
  • Location: @ my laptop
Posted

the purple bit is an injector extension, remove it and the injector will fit the FG, although a wiring adaptor/change is required

  • Legacy Donating Member
  • Member For: 15y 4m 4d
  • Gender: Male
  • Location: Burwood, NSW
Posted

so who is a good source for genuine ID injectors at a reasonable price?

and the guys talking about the ebay connectors, can you please throw up a link as im not sure what im looking for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...