dobeat New Member 6 Member For: 15y 10m 25d Posted 19/07/11 10:41 AM Posted 19/07/11 10:41 AM 03 xr6 turbo, when I drive it for more than half an hour the back mainly the drivers side rub and heat up then stick. ive had the master cylinder ajusted and that seamed to work for a while then it comes back. there is no play in the pedal when this happens even though when I had them ajusted (master cylinder)there was play I dont know where to start next.it seem s it was ok until I got into the abs one day.please help .ps my sunroof got stuck open and it turned out to be broken wires on the switch.
ebxmple Member 1,322 Member For: 18y 7m 19d Posted 19/07/11 11:41 AM Posted 19/07/11 11:41 AM Are you sure its the brake caliper and not the handbrake? Are all the caliper slides clean and lubed and is the brake fluid clean and full?
FastR1Red Member 360 Member For: 21y 4m 17d Gender: Male Location: Mt Waverley Posted 19/07/11 11:44 AM Posted 19/07/11 11:44 AM Mine did exactly the same thing. I complained about it twice to my normal service guys they never fixed it. I took it to MC2 Automotive in Dandenong last week and he fixed it immediately. Helps cos he knows BA's back to front. Top bloke. He also fixed a few other stuff ups the other guys did. 1
Impellor Member 835 Member For: 16y 1m 29d Gender: Not Telling Posted 20/07/11 12:20 AM Posted 20/07/11 12:20 AM Curious as to what the problem ended up being? Cheers
FastR1Red Member 360 Member For: 21y 4m 17d Gender: Male Location: Mt Waverley Posted 20/07/11 03:23 AM Posted 20/07/11 03:23 AM Something inside the brake booster. He said it's a common problem on BA's and 2 ways to fix depending on severity.
dobeat New Member 6 Member For: 15y 10m 25d Posted 24/07/11 10:35 AM Author Posted 24/07/11 10:35 AM the hand brake has been ajusted it dosnt seem to be that, my mechanic seems to think it is the master cylinder,it gets hot and the brakes lets go with a funny sound like they are bent or something
dobeat New Member 6 Member For: 15y 10m 25d Posted 24/07/11 10:38 AM Author Posted 24/07/11 10:38 AM (edited) does replacing the booster fix the problem?dont care if I have to replace just hate chasing my tale replacing everything to not fix the problem!ide take it to dandenong but reside on the gold coast Edited 24/07/11 10:40 AM by dobeat
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 26d Gender: Male Location: Perth Posted 24/07/11 10:47 AM Posted 24/07/11 10:47 AM The atmospheric valve in the booster starts to leak and applies the brakes. Changing the booster will fix it, but you may be able to get the atmospheric valve serviced if its not to far gone.
Mc2automotive Legacy Donating Member 16 Member For: 15y 2m 10d Gender: Male Location: DANDEONG SOUTH Posted 25/07/11 06:27 AM Posted 25/07/11 06:27 AM (edited) The master cylinder applies itself due to the brake booster.Replacing the brake booster will fix it, but it can also be fixed with a simple mod to the adjuster nut behind the master cylinder. Either wind the bolt in 3mm or put 2 washers between the master cylinder and the booster.Also machine your front rotors as the will have DTV (Disc Thickness Variation) due to the brakes applying themselves.I worked at a Ford dealer from 1998 - 2010 including 4 years as a Master Tech until I recently opened my own workshop. Edited 25/07/11 07:29 AM by Adam No need to shout
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now