Jump to content

Recommended Posts

  • Brisbanes Resident Detailer
  • Donating Members
  • Member For: 16y 3m 26d
  • Gender: Male
  • Location: In my Cabin Outside Brisbane.

Apart from one bolt, everything is just clipped in. First pop of the seat beltbolt cover and then remove the bolt itself. Removing the seatbelt just makes access easier, taking the seats out also really helps and for a 3minute job well worth it. The plastic covers around the seat mounts just pull off, although some force is needed. Finally pull the door seal away from the bodywork, then just pull the rear panel towards you.

You can also remove all the scuff panels from the bottom of the door opening as well to make life easier. Use a watchmakers screwdriver to pop out the long thin cover and then remove the 2 (maybe 3) screws.

Fairly easy.

  • Member
  • Member For: 14y 5m 14d
  • Gender: Male
  • Location: Melbourne

Ute or Sedan...

UTE,

Rancid, do you mean the front speakers?

I just want to take off the back section, right behind the seats, on the back wall and the side parts right near the speakers.

do I have to pull off the whole driver side and passenger side to access the rear??

Thanks for the help.

Edited by lach
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'