What Do You Need To Hit 380-400 Rwkw?

[RAP1D]

for F6 FG

Cooler & piping & intake

full exhaust

injectors

surge tank and 044

valve springs

tune and xcal3 (or use VCM)

wastegate port & actuator

if it's an xr6 / g6et it will need bigger turbo, F6 turbo is a straight swap on

[dre]

Thanks. hadn't really thought about valve springs as no one seems to mention them on F6's.

[whistler6]

porting the wastegate & larger flapper valve is around $650? I think anyway, someone else should know!

[DjGsTa]

for F6 FG

Cooler & piping & intake

full exhaust

injectors

surge tank and 044

valve springs

tune and xcal3 (or use VCM)

wastegate port & actuator

if it's an xr6 / g6et it will need bigger turbo, F6 turbo is a straight swap on

I got told not to use VCM if your going over 300rwkw

Apparantly it's no good for over 300rwkw because the sct tuners have more spark tables or something?

[icer]

yes they are id2000's ratter. connections! if you want them for under 200$ each let me know Might start smashing the ebay market with em...

[ratter]

That's cheap for ID2000.

Do they have serial numbers on them?

[wrxrw]

my tornado with a zf just went 430rwkw @ 16psi the other day with an XFT Xtreme Package on E85 with standard engine & turbo running id2200's, twin 044's and process west fuel rail.

check my thread in the xft section of the forum

[JVK]

How much are the larger flapper valves,and who sells them ?

[ratter]

we have them in stock, off hand they are approx $60-65.

You need to fit them in conjunction with the port job and stronger actuator

[phantom6]

yes they are id2000's ratter. connections! if you want them for under 200$ each let me know Might start smashing the ebay market with em...

did u get them from sticks

well I have sitting in my room (since late december) are bosch indy whites 1600cc injectors. I only found out about the id's 3weeks ago :(

I here the id2000cc r better on idle then the indy 1600's. will have to wait n see.