Dash Mount Gauge Pod!

[Mr_Joe]

I bought my gauge pod off ebay too...apparently genuine fpv for about 270

then just fitted aftermarket autometer cobalt series gauges

[Turbo Ute]

I fitted my own gauges, was easy as, and I know where all the wires are run, its pretty easy to install gauges just takes time to run all the wires thur the firewall to engine bay etc etc

[Robski]

I have decided to change to a 3 gauge pod. B.P.T. do a 3 gauge pod that clips in the same as the original dash piece, the pod goes for $170. I think I will run a Boost, Oil Pressure and Air/Fuel ratio. What do you guys think???

Edited 05/01/11 08:06 AM by Robski

[Turbo Ute]

I have got three gauges, oil press oil temp and boost

[XF Falcon]

Robski, that is the Pole Position Tripod gauge holder.

I've got it, fits well.

you have to cut off/shorten the threads which stick out the back of autometer cobalt gauges if that's what you are going to install into it.

Edited 05/01/11 08:56 AM by XF Falcon

[mattyb]

I want one for my territory? Anyo e seen one?

[Robski]

Thanks for that XF.

Yeah I was looking at the Auto Meter Cobalt gauges. Thanks for the heads up on the shortening the treads.

Cheers

[Turbo Ute]

Robski, that is the Pole Position Tripod gauge holder.

I've got it, fits well.

you have to cut off/shorten the threads which stick out the back of autometer cobalt gauges if that's what you are going to install into it.

hey mate how did you get a full color screen in your icc??? thanks

[Ralph Wiggum]

You Dawg,

I heard you like your car so we put a picture of your car in your car so you can look at your car while your driving your car....

seriously tho its pimped. Nice job Mikey

[XF Falcon]

Yo dawg! thanks heaps lol