clark522 Legacy Donating Member 128 Member For: 16y 6m 17d Gender: Male Location: Melbourne Posted 06/11/10 01:55 AM Posted 06/11/10 01:55 AM I just got my car back last week from having a new engine fitted and its been going very good except when I give it a few boots in a row, if I come to a stop the revs will go up and down between 750 and 250 and then sometimes the car will just stall. It just turns itself off. Gonna give dion at dynomite a call during the week but does anyone else know what it might be?? Cheers guys
icer Banned 2,335 Member For: 17y 2m 2d Gender: Male Location: Aspendale, Vic. Posted 06/11/10 04:12 AM Posted 06/11/10 04:12 AM was it retuned with the new motor?
clark522 Legacy Donating Member 128 Member For: 16y 6m 17d Gender: Male Location: Melbourne Posted 06/11/10 04:37 AM Author Posted 06/11/10 04:37 AM All stock mate. Dion chucked it on dyno and came up fine aswell. Made 181rwkw.
southside Member Member 868 Member For: 17y 8m 17d Gender: Male Location: Radelaide.. Real Posted 06/11/10 04:49 AM Posted 06/11/10 04:49 AM electronics or throttle body clean is what I advise mate!I had the same issue and just had to clean the throttle body and never had the problem since! u find if u keep the A/C on it wont stall! but try the throttle body and then the electronic!
clark522 Legacy Donating Member 128 Member For: 16y 6m 17d Gender: Male Location: Melbourne Posted 06/11/10 05:47 AM Author Posted 06/11/10 05:47 AM The throttle body is just the thing between the manifold and the crossover yeh? Is it hard to take off? And how would I go about cleaning it?
hawlass Legacy Donating Member 1,161 Member For: 18y 10m 10d Gender: Male Location: left right out Posted 06/11/10 06:10 AM Posted 06/11/10 06:10 AM (edited) Just loosen the hose clamp on the crossover/ throttle body joint and gently wriggle the hose off, you may need to remove the whole crossover. You can clean the throttlebody in place without removing it, just use throttlebody cleaner and a rag. It may cough a little when you start her again for the first time but its normal.This may help-- http://www.fordforums.com.au/showthread.php?t=73561 Edited 06/11/10 06:11 AM by hawlass
rule1110 Member 71 Member For: 18y 4m 18d Posted 08/11/10 02:19 AM Posted 08/11/10 02:19 AM Mine used to threaten to stall a fair bit and then it did a couple of times. Once I learned how to clean the throttle body that fixed it all up. Seems to get dirty pretty quick though, like a few 1000 kms.
freeze_dk I am dissatisfied with my current employment situation Legacy Donating Member 8,610 Member For: 19y 11m 22d Gender: Male Posted 08/11/10 04:28 AM Posted 08/11/10 04:28 AM I used a toothbrush instead of a rag to clean the TB,, gets in there more
xrturbomatty Member 79 Member For: 18y 5m 23d Posted 08/11/10 07:33 AM Posted 08/11/10 07:33 AM (edited) Hey my ba used to stall when I came to a stop some times turned out to be the throttle position sensor I think u can reset it to by pushing the accelerator in and kicking the car over for 10 seconds Edited 08/11/10 07:36 AM by xrturbomatty
clark522 Legacy Donating Member 128 Member For: 16y 6m 17d Gender: Male Location: Melbourne Posted 27/11/10 12:21 PM Author Posted 27/11/10 12:21 PM got the throttle body cleaned out a couple of weeks ago and been running good since except the last few days. The other day I filled up petrol and it wouldnt start, dunno why cuz headlights were on and battery seems fine?, but push started it and all was fine. Then last night, revs started fluctuating again after a 'spirited' few minutes of driving, and then tonight its stalled 4 times, twice that ive had to push started. Anyone else know what might be the cause?xrturbomatty- wouldnt the car just start straight away instead of kicking over for 10 seconds?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now