New Engine Build

[Redback]

Hey guys,

It's been a while since I've been on here. The car was running very well for a while until it threw a rod on number 2 cylinder. It left me with a big mess to clean up. I have since got another block to work with and am using Brad from Atomic to do the following to the engine. I am planning on running about 400rwkw. Please let me know if there is anything that I should be adding while the engine is apart.

Atomic HD valve springs

CP pistons and Atomic rods

Race girdle

billet oil pump gears and modified housing

Stud kit for the head

[MiKa]

I reckon Brad would have a better idea than most on the site mate...

[xr6t_ute]

+1000

[mic]

shud be right with that, make sure u get a balancer too. that is on the outside though

[xr6t_ute]

Just in your signiture it says pm surgetank pm intercooler, is that suppose read pw surgetank pw intercooler?

Never heard of any pm products.

[icer]

plazmaman maybe xr6t_ute?

Just ask brad, he will have a package for what is needed. You have all the goodies, just need the motor.

on a side note....

376rwkw tunehouse tune with a surge tank and I popped a rod? How long did you get? that's some seriously huge power for a BA motor! not to mention auto (built? convertor?)

Ever run down the track? what times?

[xr6t_ute]

ah correct *Beep* plazmanman.

[Redback]

plazmaman maybe xr6t_ute?

Just ask brad, he will have a package for what is needed. You have all the goodies, just need the motor.

on a side note....

376rwkw tunehouse tune with a surge tank and I popped a rod? How long did you get? that's some seriously huge power for a BA motor! not to mention auto (built? convertor?)

Ever run down the track? what times?

Yeh the products are Plazmaman. The guy before me had an Intune tune on it and it was pinging its' head off so I imagine the damage was done before Tunehouse squeezed it to its limit. No built box and no runs. Lasted about 6 months of daily driving.