Woggymobster Member 23 Member For: 19y 5m 11d Gender: Male Location: Mitchell QLD Posted 30/05/10 02:44 AM Posted 30/05/10 02:44 AM Hey all hoping someone could help with this problem that just started. When I drive the car at around 50-60km just cruizing min boost it will start to surge. Now when I thump it off the line it will surge onto boost feel like no power then hammer off again sometimes it will surge and sometimes it wont very intermititend. Change fuel filter, boost solinoid matenence, cleaned the throtle body and still no good. Any ideas or help would be much appricated as ford want $300 just to plug into computer...
Panda Eyes flame magnet Legacy Donating Member 5,674 Member For: 18y 4m 20d Gender: Male Location: adelaide hills- 'race air' central Posted 30/05/10 03:21 AM Posted 30/05/10 03:21 AM plugs? coils?
Worm A much better forum Legacy Donating Member 3,808 Member For: 18y 2m 13d Gender: Male Location: Victoria Posted 30/05/10 03:25 AM Posted 30/05/10 03:25 AM Plugs and coils worth a try. Plugs are about $90 on eBay... Coils are $160 delivered from a guy named Michael( username Michael something I think) who works at coffee ford in dande... What's the worst that can happen? You have new coils and plugs ;-)
Woggymobster Member 23 Member For: 19y 5m 11d Gender: Male Location: Mitchell QLD Posted 30/05/10 03:47 AM Author Posted 30/05/10 03:47 AM Thanks for your input guys just noticed I have oil and black saute all around the BBM join might have a made vaccum leak too..
Woggymobster Member 23 Member For: 19y 5m 11d Gender: Male Location: Mitchell QLD Posted 17/06/10 09:47 AM Author Posted 17/06/10 09:47 AM Hey all just a update. No leak on the manifold, change the plugs and coils, went like a dream for about 10min and back to the same problem..... got me really stuffed and other guys out there that could give some input on this as it is bloody doing my head in....
Woggymobster Member 23 Member For: 19y 5m 11d Gender: Male Location: Mitchell QLD Posted 27/06/10 05:28 AM Author Posted 27/06/10 05:28 AM Just to let you guys know problem all fixed.. Took it to mech and they found that the cam sensors were dead one of the wires fell off the firewall and burnt out on the exhust. New wiring and new sensors all good now
straughsberry Legacy Donating Member 1,846 Member For: 19y 1m 18d Gender: Male Location: Broady, Melbourne Posted 27/06/10 05:41 AM Posted 27/06/10 05:41 AM Cam angle sensor on exhaust side?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now