Jump to content

Recommended Posts

  • Member
  • Member For: 16y 1m 6d
  • Gender: Male
  • Location: Wollongong

Hello I am new to the turbo tuning. I have a BF F6 6sp auto, I just dropped it off at my local tuner. New 60lb injector plus Walbro Gss340 pump, custom tume and KN air filter going in. My ???? is what kind of power at the rear wheels should I be looking at. Tunning it on the dyno tomorrow.

post-34904-1247470777_thumb.jpg

Link to comment
https://www.fordxr6turbo.com/forum/topic/59550-what-to-expect-from-f6/
Share on other sites

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Donating Members
  • Member For: 18y 8m 24d
  • Gender: Male
  • Location: Melbourne, VIC

The rwkw figure you shouldnt worry about too much, its how it drives and the smile from ear to ear is what counts the most, when you push the pedal...

Whos tuning it?

  • Member
  • Member For: 16y 1m 6d
  • Gender: Male
  • Location: Wollongong

He is a local tuner who has done a few xr6 turbos. What would I need to get to the 300kw. He told me alot of the gain would be in the mid rev range.

  • UNDERCOAT CRUISER!!!
  • Donating Members
  • Member For: 16y 3m 28d
  • Gender: Male
  • Location: brisbane

well I got 276 rwkw with the same mods as you but also put valve springs in for peace of mind!!

  • Member
  • Member For: 16y 1m 6d
  • Gender: Male
  • Location: Wollongong

Maybe I should have done the valves, but talked to a few owners, and told the valves in the F6 would be fine with that sort of upgrade.

  • Donating Members
  • Member For: 17y 7m 9d
  • Gender: Male
  • Location: Carindale, Brisbane

The valve's are different in every car, one might be fine but the next might not be. With these cars it's always better to play on the safe side. I would advise you to get them put in this time, or with the next round of modifications.

  • Member
  • Member For: 16y 1m 6d
  • Gender: Male
  • Location: Wollongong

Thanks for that. Will talk to the mech tomorrow about the valves. What would be the next bolt on mod to do. I do not want to much around 300rwkw. My wife is afraid to drive the car as is(she does have her own car but loves the looks she get for younger bokes when they line up at the lights next to her)

  • Donating Members
  • Member For: 17y 7m 9d
  • Gender: Male
  • Location: Carindale, Brisbane

Your exhaust and intercooler will be the next restriction. With those you should be well over 300rwkw. If you worry about your missus driving the car ask them to do a Valet tune for her, that way she can drive the car but with the knowledge that it won't get away from her. Then when she's finished just load back up your tune and off you go!

Edited by Howsee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'