Exhaust Manifold

[mic]

yer not on a falcon, should be full boost by around 3000rpm. not a huge turbo either.

[Mr Typhoon 500kw]

He he nice photos of the datto with the turbs above bonnet height...

In reponse to Senna T I origianlly had the crossover pipe from Process west ( all polished priping and crossover pipe for sale too if anyones interested)

and it rubbed on the bonnet insulation. add heat copious amounts of heat>>> and it will possibly burn the paint on the bonnet.??

HArmonic balance from Who >?? Atomic ?

Anyway any more ideas on the tuner.?? What is BTA/Autotech like ?

Edited 09/04/09 10:22 AM by Mr Typhoon 500kw

[mic]

yes atomic 4 the balancer. even with your turb 2 or 3cm lower, it will still burn through the bonnet insulation. just get a beanie, is the to4 water cooled ? and all the above tuners are worthy.

[Mr Typhoon 500kw]

Thanks Mic, it is water and oil cooled. from GCG.

[01txr]

Senna, Beat me to the pulley, just also wondering if you have also fitted

billet Oil Pump gears as they to will fail if you havn't done so.

[wilba]

are you kidding mate there huge

. not a huge turbo either.

[blueboost]

are you kidding mate there huge

There only a 750hp turbo, on the right exhaust manifold,(on a 4lt) they will make boost close to the standed one.

David

[wilba]

yea but there still a big turbo

[mic]

are you kidding mate there huge

lol, they are of decent size. not huge. have a read.

http://www.skylinesaustralia.com/forums/Gt...is-t246293.html

[Mr Typhoon 500kw]

yeah its a big turbo the front housing is a larger 4 inch along with the intercooler inlet being 3 inch not like the standard which I think is 2.5 inch... its actually an 850hp wheel. I made 400rwkw with the standard GT3540 but it was ringing its neck , I had the option to go for the GT4088 which is a 1000hp flywheel turbo but it would have come on boost at 3800 rpm or so (im told)and yes the motor does have billet oil pump gears, ARP main and head studs, new valve stem seals, angle cut valves including re-seating and all the port inlet and exhaust have been shaved. So from my investigation the head should add some to the flow.

Edited 09/04/09 11:24 PM by Mr Typhoon 500kw