Lowered Xr6 Ute

[Ute Boy]

Ok , thanks for that. in those pics the front hadn't been lowered yet. although when I did lower the front the back was still sitting that low.

[Jman]

Ahh rightio.

Yea those leafs will drop the arse end pretty low

With stock 17's it'll sit even lower

Good luck with it all, let us know how you get on...

[Ute Boy]

What have others experienced when they lowered their cars with SL in the rear with 17's? did u have your car lowered when it was on 17's jman?

[Jman]

Nah I didnt mate.

I had 19's on standard suspension for a while... true 4wd spec

[ridingtom]

I've got mine lowered front and rear, sits about same at back as yours but my leafs still have alittle bend in them. had 2" blocks to put in aswell but shock mount does'nt clear 17" stock wheels. Waiting on my 19's now so can put blocks in.

Edited 15/03/09 06:48 AM by ridingtom

[Swanga]

The drivers side will always sit higher to compensate for the driver, you will find you wont notice it as much over time.

[senna_T]

Threads McMerged, no point having two threads about the same thing...

[igsta]

I am pretty sure that the passenger side rear spring is about 10mm higher than the drivers side to compensate for the fuel tank. This is for a stocker. I found this out the hard way after lowering my ute 50mm.

Jman my car at th front looks like yours, although my springs are KFFL-57SSL are you sure you are not talking about these.

[Jman]

Nah mines definitely KFFL-57SL's.

I've done so much stuffing around with the suspension I know for sure.

KFFL-57SSL's are the springs I want though...

[F6_Charlie]

Ive been looking at goin for the king super low leaf springs for my ute as after I reset my stock ones its now creeking and driving me crazy