johnoz06 Member 18 Member For: 20y 5m 23d Gender: Male Location: WA Posted 12/09/08 07:45 AM Posted 12/09/08 07:45 AM Hi People. I need to source a set of 18" rims (as most R spec rubber is really only available up to 18" at the moment) for my FG F6. I have the standard 4 pot Brembo calipers. Now the question arises - which rims will fit the FG and what are the consequences of putting the same off set rim on the front and rear of the car (rather than the different off sets that FPV's usually run)?Or should I stump the extra money and buy "custom" rims that have the same offset as the standard rims but 18" ilo 19" standard size?Also, can I go up in wheel width, to say a 9 or 9.5" width?Any advice would be appreciated.
johnoz06 Member 18 Member For: 20y 5m 23d Gender: Male Location: WA Posted 02/10/08 03:03 AM Author Posted 02/10/08 03:03 AM I have since found out that somewhere during BF, FPV changed the rims to have the same offset front and rear - so that is no longer an issue.I have now tried two different rims that are advertised as "Brembo Clearance" and they go NO WHERE NEAR FITTING over the front caliper.I need 18" rims and prefer 8.5" front and 9.5" rear widths - that will fit. Anyone with any experience of fitments to the FG yet??
Erko Legacy Donating Member 1,079 Member For: 22y 11m 18d Gender: Male Location: Sydney Posted 02/10/08 10:54 AM Posted 02/10/08 10:54 AM FG fitment will be the same as BF. There are many wheels that will fit (trust me, I have a BF2 F6). The problem is they arent the crap chromey chinese blingers that many of the boys like and you can get from your local tyre shop. First up sizing, 18x8.5 +30 Front and 18x9.5 +38 or thereabouts on the rear would be ideal. you will need to get the guards rolled. Look at the Japanese brands Enkei (rpf1), Work (cr kai) and Rays (re30, ce28n). You want the high clearance models, many of them are designed to fit with Brembos on Japanese cars. I have Work Emotion CR KAI in 18x8.5 +30 all round, I didnt want to wider rears and I run Advan A13s which are excellent.
Benny Member 1,869 Member For: 23y 1m 15d Gender: Male Location: Newcastle Posted 03/10/08 02:50 AM Posted 03/10/08 02:50 AM Johnoz06,Have you tried to get your hands on some RE01R's? They will fit on your 19 inch wheels and come in the size required. They get a good review for R spec tyres.Benny
iTec TEAM BA Legacy Donating Member 1,755 Member For: 21y 9m 13d Gender: Male Location: North of The Bridge Posted 03/10/08 04:07 AM Posted 03/10/08 04:07 AM try finding some BA/BF factory 18's they should fit and clear your brembros
cooltint Member 686 Member For: 23y 5m 1d Gender: Male Location: Gold Coast QLD Posted 04/10/08 01:14 PM Posted 04/10/08 01:14 PM I have bought a set of standard BA 18" to use as track wheels and they fit over the four pot Brembos on the BF F6.Big AL
johnoz06 Member 18 Member For: 20y 5m 23d Gender: Male Location: WA Posted 05/10/08 08:20 AM Author Posted 05/10/08 08:20 AM Thanks guys for your help. I have just managed to find the G Max Boston (M100) that just fits in the required size. I have to say I like the look of them so much against the Nitro Paint that I'm thinking of buying a set of 20's for the street!Lowering the car with a Tein (sp?) kit is next on the agenda week after next.In my trials I began to think that the fitment had changed for the FG - but managed to fit a 18*8 from my BA2 F6 on the front of the FG - so if anyone is interested it seems the fitment HAS NOT changed from BA/BF etc.
TerryF Member 125 Member For: 17y 11m 19d Gender: Male Location: Brisbane Posted 07/10/08 08:23 AM Posted 07/10/08 08:23 AM In my trials I began to think that the fitment had changed for the FG - but managed to fit a 18*8 from my BA2 F6 on the front of the FG - so if anyone is interested it seems the fitment HAS NOT changed from BA/BF etc. Are you interested in selling the old 18 *8's? If so let me know.RegardsTerry
johnoz06 Member 18 Member For: 20y 5m 23d Gender: Male Location: WA Posted 07/10/08 09:26 AM Author Posted 07/10/08 09:26 AM TerryF,They're still on the car - which is for sale. So sorry can't sell the wheels separately!
XR6T 747 Member 37 Member For: 19y 5m 8d Gender: Male Location: Melbourne, Vic Posted 27/10/08 11:06 AM Posted 27/10/08 11:06 AM In my trials I began to think that the fitment had changed for the FG - but managed to fit a 18*8 from my BA2 F6 on the front of the FG - so if anyone is interested it seems the fitment HAS NOT changed from BA/BF etc. Are you interested in selling the old 18 *8's? If so let me know.RegardsTerryHi Terry,I have a set of Genuine FPV BA / BF F6 TYPHOON wheels 18x8 in mint condition with FPV centre caps with original black wheel nuts- wrapped in Dunlop SP 9000 245X40X18 tyres with 80% treadPM me if interested.Regards...XR6T747
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now