Bov Spring Pressure

[104ord]

ive bought a gfb mach1 bov for my project and the spring is very stiff.... can it be too stiff? ive read that people cut down their spring to reduce pressure.. if I was to reduce the pressure by cutting the coils can it be too light? thanks

[AJN]

ive bought a gfb mach1 bov for my project and the spring is very stiff.... can it be too stiff? ive read that people cut down their spring to reduce pressure.. if I was to reduce the pressure by cutting the coils can it be too light? thanks

Fark, dont go cutting it mate!,

what a waste of money that will be, Should have got an adjustable one. I have several. If its too loose then it sounds like your granny after a can of beans. Depending on your boost of course, but trry to keep em nice n tight. It should sound like your ASS GETTN WHIPPED by a Lag Vegas Hooker!

Short and sharp baby!!!!!

"WWWWWWIIIIIiiiiiiiiRRRRRRkkkkkkkk"

like a snapping noise. I ve had from 7PSI upto 19PSI through the same valve, ( it was adjustable ). The higher the PSI the louder she'll get.

Ive had people on the side walk almost jump out of there skin & start baking brownies in there undies!

DONT CUT THE SPRING!

[104ord]

what valve were you using? its just sooooo tight im afraid she wont release? with low boost

[smarty]

what valve were you using? its just sooooo tight im afraid she wont release? with low boost

low boost , don't worry it wont effect it ,like AJN said Las Vagas Hooker

you want em tight !! MMM contradiction Vagas Hooker & tight in the same sentence LOL

Smarty