Jump to content

Recommended Posts

  • Member
  • Member For: 21y 11m 2d
  • Gender: Male
  • Location: NSW
Posted

Hi Guys

Ran my car at WSID the other week and the best result was 13.1.

I was on street tyres and there was next to no wheel spin.

Stalled it to about 3000RPM, which may not be enough.

Its an 4 speed auto BTW.

Pretty disappointed at that time considering I'm running a phase three with 315 ATW at my disposal.

I’m going back in a couple of weeks, so I’m looking for some tips.

Dose that sound right on street tyres and will semi slicks make that much difference?

One thing I noticed was the car started pinging just before the ¼ line, so I may have a fuel supply issue.

What do you guys think?

  • Replies 29
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • Legacy Donating Member
  • Member For: 20y 7m 19d
  • Gender: Male
  • Location: The Shire Sydney AUS
Posted

what was your MPH

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 19d
  • Gender: Male
  • Location: SW Sydney
Posted

I don't have alot of experience with the auto, but I think you definately need a surge tank. I don't think you need to stall that high, someone will have a better idea about this than me

  • Built F6 & VE SS-V
  • Legacy Donating Member
  • Member For: 19y 2m 3d
  • Gender: Male
  • Location: Melb
Posted (edited)
One thing I noticed was the car started pinging just before the ¼ line, so I may have a fuel supply issue.

make sure you have around half a tank before you go next time, or just get a surge tank like Senna T said.

Edited by Bionic Rspec
  • Member
  • Member For: 21y 11m 2d
  • Gender: Male
  • Location: NSW
Posted
what was your MPH

I cant find the time slip but it was about 115MPH.

The 60ft was about 2.2

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 19d
  • Gender: Male
  • Location: SW Sydney
Posted

fark mate, 115MPH and 13.1 doesn't make sense in my book. I have a T56 manual and ran 13.0 @ 111MPH with 2.1 60'

When is the next time you are going out? maybe some of us can meet up and spot your runs. We might be able to give you some pointers

  • Legacy Donating Member
  • Member For: 20y 7m 19d
  • Gender: Male
  • Location: The Shire Sydney AUS
Posted

practice practice practice .... get that 60 down you will see that 12.. your MPH is there.

  • Member
  • Member For: 21y 11m 2d
  • Gender: Male
  • Location: NSW
Posted
make sure you have around half a tank before you go next time, or just get a surge tank like Senna T said.

Sorry guys, but what is a surge tank?

I had about half a tank of fuel, it was BP 98.

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 19d
  • Gender: Male
  • Location: SW Sydney
Posted

a surge tank makes sure there is a constant steady supply of fuel to the engine.

Check out process west and Rapid, they both have surges

  • Member
  • Member For: 21y 11m 2d
  • Gender: Male
  • Location: NSW
Posted
a surge tank makes sure there is a constant steady supply of fuel to the engine.

Check out process west and Rapid, they both have surges

Thanks Senna

I will look into it.

I think the biggest problem is the launch, there seems to be plenty of power and speed, just getting it off the line is my let down.

It’s a Ute if I didn’t mention it, so no traction control and not much weight in the rear end.

Not sure when we are running again, it’s a work thing, so I will go out when the boys are ready.

I will let you know when we run again and thanks for the advice.

It’s a white Ute, lowered with Typhoon wheels, XR8 bonnet and a hand cover on the rear, so it stands out, should be easy to spot.

Were you on street tyres or slicks when you ran that time?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...