Aftermarket Taillights

[leroyxr6t]

Has anybody installed aftermarket taillights ?are they easy to do any pics or links to tutorials would be greatly appreciated,also any advice on what to avoid .

Thanks in advance lads .

Cheers Leroy. :

[YPURV4]

There easy as to install leroy, a couple of screws and that's it, the bulbs just twist out the only thing that's a bit tricky is you have to push the tail light out.

say your looking at the tail lights from the back of the car you have to push them towards your self, if you get what I mean.

[SAMSXR6T]

all there is are two phillip head scews and that pretty much it..

[silverchris]

Been there, done that. Takes about 15 minutes tops. One phillips head screwdriver it all that's required; from what I remember a total of 4 screws need removing (the ones you can see holding in the current tail-lights when you life the bootlid).

Most aftermarket lights come with instructions anyway.

[PSYCHO XRT]

Has anybody installed aftermarket taillights ?are they easy to do any pics or links to tutorials would be greatly appreciated,also any advice on what to avoid .

Thanks in advance lads .

Cheers Leroy. :

←

I bought and installed new tail lights last week

click on below link for pics and info.

http://www.fordxr6turbo.com/forum/index.ph...topic=32743&hl=

San.

[leroyxr6t]

I drive a ute .Are the screws the two you can see when you lower the tailgate?

Leroy.

[swanee]

On the utes there are 2 8mm bolts on the tail lights.

Undo the bolts and wiggle the light until its loose. Might need a little bit of force to work it loose.

I drive a ute .Are the screws the two you can see when you lower the tailgate?

Leroy.

←

[leroyxr6t]

Thanks heaps ill give it a go.