937 Member 266 Member For: 20y 2m 22d Posted 24/11/06 10:46 AM Posted 24/11/06 10:46 AM (edited) Dont worry I fully intend to only put 4 litres in. Wheteher it goes in thropugh the fill plug, or the reverse switch. I will find out tommorrow when I am under the car.Scotty←This is from the T56 Sercice CD Edited 24/11/06 10:50 AM by 937
stealthxr Legacy Donating Member 553 Member For: 20y 7m 18d Gender: Male Location: The Shire Sydney AUS Posted 24/11/06 10:52 AM Posted 24/11/06 10:52 AM If you fill them from the so called filler plug you WONT get enough oil into your gearbox. You need to put in 4 litres and you can only do it from the speedo drive.http://www.fordxr6turbo.com/forum/index.ph...e=post&id=26103←There is no speedo drive, Its your reverse light switch....
Kimberley Scott www.australianflag.org.au Legacy Donating Member 6,763 Member For: 21y 2m 8d Gender: Male Location: Brisbane Posted 24/11/06 10:53 AM Author Posted 24/11/06 10:53 AM Mate now you are confusing me.Let me get this right.Warm gearbox,Drain gearbox,Put back in drain plug,undoe fill plug, or reverse light switch,put 4 litres transmax Z in gearbox,put fill plug/ reverse light switch back in,wipe up any spills, and finally take it for a drive.If there are any dramas with those steps then please let me know, but that is how I see the job and how I intend to do it.ScottyPS I am not being a smart ass, it is that I am now getting confused and am trying to keep it nice and simple.
937 Member 266 Member For: 20y 2m 22d Posted 24/11/06 10:55 AM Posted 24/11/06 10:55 AM (edited) If you fill them from the so called filler plug you WONT get enough oil into your gearbox. You need to put in 4 litres and you can only do it from the speedo drive.http://www.fordxr6turbo.com/forum/index.ph...e=post&id=26103←There is no speedo drive, Its your reverse light switch.... ←What to look for. Edited 24/11/06 10:56 AM by 937
Kimberley Scott www.australianflag.org.au Legacy Donating Member 6,763 Member For: 21y 2m 8d Gender: Male Location: Brisbane Posted 24/11/06 10:58 AM Author Posted 24/11/06 10:58 AM Cheers that is the sucker I was going to use, if I could not get enough in through the fill plug. I have printed of the TSB and had a good look at it. Scotty
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now