Jump to content

Recommended Posts

  • Used to work at the Ford Proving Ground!
  • Lifetime Members
  • Member For: 22y 3m 13d
  • Gender: Male
  • Location: Geelong
I guess by fiddling with the exhaust somewhat u could eliminate that droning that u mentioned at 100km's? Maybe a few nips and tucks and work on the in-line features such as muffler, resonator etc may make it sound better and run smoother?

the noise that I speak of at 100km/h isn't a drone its just that the exhaust was too lound. once we did a few kms on the mufflers it seemed to quieten a little but not enough for me! Will see. The whole idea of the exhaust is to use the factory stuff the way it is as much as possible to make it cheap as possible, so we don't want to stuff around to much.

  • Member
  • Member For: 22y 7m 8d
  • Location: Sydney, Australia
the noise that I speak of at 100km/h isn't a drone its just that the exhaust was too lound. once we did a few kms on the mufflers it seemed to quieten a little but not enough for me! Will see. The whole idea of the exhaust is to use the factory stuff the way it is as much as possible to make it cheap as possible, so we don't want to stuff around to much.

harasn, you say this exhaust sounded to loud for you likings. How loud was it (in car) compared to a stock XR6-T? Does it sound the same as an XR6-T?

Personally I would like the N/A XR6 to sound a bit beefier and a bit different from the stock 6 cyl (Yes I know its got the stock 6 cyl - but hey it is an XR!, it shouldn't sound the same as the stock 6 cyl :) ). However I too don't want the sound to be too excessive and an intrusion.

My understanding was the XR6-T sounded beefier than the standard 6 cyl but not over the top. I was just hoping that a lot of this was down to the exhaust setup and hence it could be added to the non-turbo 6 to help improve performance and make it sound a bit nicer.

Anyhow its great to see someone actually trying out different options on the N/A XR6. I would say there are quite alot of people monitoring your progress to work out what the best way is to go, in regards to exhaust options on the non-turbo 6. So thanks for your work harasn. :blink:

  • Bored Member
  • Administrator
  • Member For: 22y 6m 25d
  • Gender: Male
  • Location: Dé·jà vu
Anyhow its great to see someone actually trying out different options on the N/A XR6.

He has to it's what he's paid to do. :laughtcont: :blink: Lucky sh!t :tears:

  • Used to work at the Ford Proving Ground!
  • Lifetime Members
  • Member For: 22y 3m 13d
  • Gender: Male
  • Location: Geelong
the noise that I speak of at 100km/h isn't a drone its just that the exhaust was too lound. once we did a few kms on the mufflers it seemed to quieten a little but not enough for me! Will see. The whole idea of the exhaust is to use the factory stuff the way it is as much as possible to make it cheap as possible, so we don't want to stuff around to much.

harasn, you say this exhaust sounded to loud for you likings. How loud was it (in car) compared to a stock XR6-T? Does it sound the same as an XR6-T?

Personally I would like the N/A XR6 to sound a bit beefier and a bit different from the stock 6 cyl (Yes I know its got the stock 6 cyl - but hey it is an XR!, it shouldn't sound the same as the stock 6 cyl :) ). However I too don't want the sound to be too excessive and an intrusion.

My understanding was the XR6-T sounded beefier than the standard 6 cyl but not over the top. I was just hoping that a lot of this was down to the exhaust setup and hence it could be added to the non-turbo 6 to help improve performance and make it sound a bit nicer.

Anyhow its great to see someone actually trying out different options on the N/A XR6. I would say there are quite alot of people monitoring your progress to work out what the best way is to go, in regards to exhaust options on the non-turbo 6. So thanks for your work harasn. :thumbsup:

before we started this exhaust mod on the NA I had heard that a turbo cuts down the exhaust noise. The NA with the turbo exhaust showed just how much it does cut the noise up! Its too loud but we will have figures to quote soon. It wouldn't be legal. Its very harsh as well! will find something that sounds good as that's what we are looking for!

  • Used to work at the Ford Proving Ground!
  • Lifetime Members
  • Member For: 22y 3m 13d
  • Gender: Male
  • Location: Geelong

nah no dyno figures! we don't test for power out here its more for NVH stuff. Will get it tested to see how loud it is soon I hope. then try another version! seemed to go better but!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'