loop Member 49 Member For: 21y 6m 2d Location: North Central Victoria Posted 04/11/04 12:08 AM Share Posted 04/11/04 12:08 AM I had my car serviced on Monday with no problems but the service manager sugested tha I needed a wheel alignment.Im heading to Tassie next week and the only place that could do the job was Bob Who? Took the car in yesterday and when I went to pick it up they told me they had a problem when doing the balance. They managed to damage one of my wheels. I insist they replace the wheel and they agree. :lol: A few minutes later the guy comes out and tells me there is onother problem, I have 3 bent rims.The only good one is the damaged one. He tells me I can heve the rims rolled for $80 to $100 each or I should consider buying a new set at my cost less trade in.I have never noticed any problems with vibration even at over 200 kph.I told him to put the bent wheels back on the car because I figure they just want to cover thier loss.When I finaly got my car I jumped in took of down the road and noticed my steering wheel is not strait. I'm not impressed.Ps: Anyone wanna buy a set of wheels.... Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/ Share on other sites More sharing options...
JB Forum Superhero Donating Members 3,109 Member For: 21y 5m 17d Location: Eastern Suburbs of Mexico Posted 04/11/04 12:17 AM Share Posted 04/11/04 12:17 AM Hmm, were'nt trying to sell you a wheel and tyre package were they? Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-182794 Share on other sites More sharing options...
crisso . Donating Members 1,199 Member For: 21y 5m 29d Location: Sydney Posted 04/11/04 12:45 AM Share Posted 04/11/04 12:45 AM hhmmmmtyre dealer did the work, took the car on the mandatory test run, hit something like a gutter and is now trying to say the wheels were that way when you drove in...sound about right????I know what I would be saying... Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-182798 Share on other sites More sharing options...
exar Member 187 Member For: 21y 2m 2d Posted 04/11/04 12:52 AM Share Posted 04/11/04 12:52 AM When I finaly got my car I jumped in took of down the road and noticed my steering wheel is not strait. I'm not impressed.Are they still doing that? Did it to me in an old Fairlane I had, AND insisted they could not get it straight ! Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-182801 Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 21y 3m Gender: Male Location: Sydney Posted 04/11/04 05:16 AM Share Posted 04/11/04 05:16 AM always get a second opinion. If the car is damaged now, go back to BJ and tellem they have to fix the damage. If the car is worse after the work, then they did something wrong and are trying to hide it.The MTA or RACV can help you. Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-182867 Share on other sites More sharing options...
igsta Member 371 Member For: 21y 7m 4d Gender: Male Location: Sydney Posted 04/11/04 11:04 AM Share Posted 04/11/04 11:04 AM My steering wheel is off center and I had Ford, Beaurepairs and Pedders all tried to fix it with no luck. Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-182961 Share on other sites More sharing options...
scooter Member 62 Member For: 22y 2m Location: Emerald Vic Posted 04/11/04 07:42 PM Share Posted 04/11/04 07:42 PM Bob Who?A few minutes later the guy comes out and tells me there is onother problem, I have 3 bent rims.The only good one is the damaged one. This is like dejavu ..... a few months ago I was heading to Uluru with my caravan so I thought before I go Ill replace the tyres (Fleetsystems pays) whilst I was waiting they came up to me and said that one of my rims is bent and cant be balanced properly!!!! Should be replaced !!!! WTF so I asked to put it on the rear and have had no vibrations what so ever after 6800km round trip back to Victoria again.Does this mean they're scamming us????? (I do find this hard to believe being a large company)Or some of the rims from the factory are bent? ( I like this senario) Or happens and its a coincidenceI think its maybe the later Scoot Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-183026 Share on other sites More sharing options...
Goobz Member 746 Member For: 20y 7m 2d Location: Sutherland Shire, Sydney Posted 04/11/04 09:42 PM Share Posted 04/11/04 09:42 PM My mate manages a bridgestone store and told me that the company in question lost they're lisence to do mechanical work 7 or so years ago for doing exactly what you are saying. Telling people things are broken so they will pay to get them replaced and not actually doing anything etc...Hmmmmm......Chris Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-183038 Share on other sites More sharing options...
loop Member 49 Member For: 21y 6m 2d Location: North Central Victoria Posted 04/11/04 10:04 PM Author Share Posted 04/11/04 10:04 PM I was just looking at my wheel alignment report. Hand written reports are always a bit of a concern, too easy for them to write down whatever they like. I thought computerised wheel alignment machines gave a computer printout of before after and recomended range.Does anyone know what the specs. should be for toe in/out camber and caster.These numbers don't mean squat without the specs. Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-183042 Share on other sites More sharing options...
exar Member 187 Member For: 21y 2m 2d Posted 04/11/04 10:41 PM Share Posted 04/11/04 10:41 PM My steering wheel is off center and I had Ford, Beaurepairs and Pedders all tried to fix it with no luck.<{POST_SNAPBACK}>Last time I worked on a car (long time ago) all you had to do was unscrew the ball joint on one side a few turns, then screw up the other side the same amount. Have things changed all that much? Link to comment https://www.fordxr6turbo.com/forum/topic/13760-wheel-alignment-and-balance/#findComment-183050 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now