FPV 521 FPV521 Member 989 Member For: 20y 9m 8d Gender: Male Posted 07/09/04 09:08 AM Author Share Posted 07/09/04 09:08 AM The throttle responce is tops on the N/A now, hows the turbo doing? CAPA do 80mm I don't know but I think its only for the XR8 (don't even think it would fit the XR6) Turbo is going really well. I think I was the first XR Turbo owner in NZ that had the SS induction work done and it has made a big difference. I was a bit cautious but I couldnt help it. Responsiveness has improves a lot and power has increased a fair bit to.They claim fuel ecomomy improves as well but I wouldnt know about that. You dont drive a XR turbo or and XR8 if fuel is a problem.Gavin Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162569 Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 9m 25d Gender: Male Location: Zombie Birdhouse Posted 07/09/04 10:31 AM Share Posted 07/09/04 10:31 AM Gavin , if you haven't already make sure you add a Hi flow panel filter, KNor BMC will do the trick . You will notice a difference with this as well. I was running SS induction and BMC filter prior to the Phase 2 install. Definately breathes better Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162621 Share on other sites More sharing options...
FPV 521 FPV521 Member 989 Member For: 20y 9m 8d Gender: Male Posted 08/09/04 07:47 AM Author Share Posted 08/09/04 07:47 AM Gavin , if you haven't already make sure you add a Hi flow panel filter, KNor BMC will do the trick . You will notice a difference with this as well. I was running SS induction and BMC filter prior to the Phase 2 install. Definately breathes better Hi, Yip have done the filters. Any thoughts as to what are better out of BMC or K+N or are they pretty much the same?Gavin Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162926 Share on other sites More sharing options...
jt Member 126 Member For: 21y 11d Location: Geelong, Vic Posted 08/09/04 07:54 AM Share Posted 08/09/04 07:54 AM I've got the same induction kit on my T, with a K&N filter. Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162929 Share on other sites More sharing options...
FPV 521 FPV521 Member 989 Member For: 20y 9m 8d Gender: Male Posted 08/09/04 09:31 AM Author Share Posted 08/09/04 09:31 AM I've got the same induction kit on my T, with a K&N filter. Makes a huge differenceWhat about high flow injectors and fuelk pump. Does that make that much of a difference? Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162971 Share on other sites More sharing options...
turb06 Dark Knight Mafia Member No. - 666 Member 3,667 Member For: 22y 3m 19d Location: Toowoomba Posted 08/09/04 11:02 AM Share Posted 08/09/04 11:02 AM I've got the same induction kit on my T, with a K&N filter.Makes a huge differenceWhat about high flow injectors and fuelk pump. Does that make that much of a difference? not untill after you put a piggyback chip on it, and even then the fuel pump is still ok, did you get a higher flowing cat with your exhaust? If not would be the next thing I would do, then the chip and possibly a better design down pipe from the turbo.Dazza Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-162989 Share on other sites More sharing options...
FPV 521 FPV521 Member 989 Member For: 20y 9m 8d Gender: Male Posted 09/09/04 07:19 AM Author Share Posted 09/09/04 07:19 AM I've got the same induction kit on my T, with a K&N filter.Makes a huge differenceWhat about high flow injectors and fuelk pump. Does that make that much of a difference? not untill after you put a piggyback chip on it, and even then the fuel pump is still ok, did you get a higher flowing cat with your exhaust? If not would be the next thing I would do, then the chip and possibly a better design down pipe from the turbo.Dazza Hi, Did get the hi flow. Will do chip when warranty runs out.Whats the best chip to use?Gavin Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-163282 Share on other sites More sharing options...
HUSTLER Member 663 Member For: 21y 9m 24d Location: Broken Hill Posted 09/09/04 09:03 AM Share Posted 09/09/04 09:03 AM I put the SS insuctions Throttle Body onto my turbo, and I cant say I really noticed any difference!! When I get my valve springs done I will get the car redynoed and see if their is a decent increase in KW I guess?? Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-163333 Share on other sites More sharing options...
FPV 521 FPV521 Member 989 Member For: 20y 9m 8d Gender: Male Posted 09/09/04 09:13 AM Author Share Posted 09/09/04 09:13 AM I put the SS insuctions Throttle Body onto my turbo, and I cant say I really noticed any difference!! When I get my valve springs done I will get the car redynoed and see if their is a decent increase in KW I guess?? Did you do the air intake, filters and exhaust at the same time? Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-163340 Share on other sites More sharing options...
HUSTLER Member 663 Member For: 21y 9m 24d Location: Broken Hill Posted 09/09/04 09:29 AM Share Posted 09/09/04 09:29 AM Already had phase 2 way b4 hand! Link to comment https://www.fordxr6turbo.com/forum/topic/12705-ss-inductions-and-big-bores/page/2/#findComment-163350 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now