Jump to content

adam.helmet

New Member
  • Posts

    1
  • Joined

  • Last visited

Reputation

0 Neutral
  1. Hi Dudes This is my first post on the forum and it seems that I am having an over boost issue and I want to sort it out. So I've got a bf xr6 turbo and after some investigation it turns out it has a turbosmart iwg 75 and seems to want to run around 13 psi. This is setup is run via bypassing the factory solenoid so my plan is to take the wastegate Actuator off and see if I can run a lighter pound spring maybe 5 or 7 and then install a turbosmart boost controller tee for the near future with the plans to run 10 psi So should 1. Take it off with the turbo still on the car 2. Take the turbo and replace the gasket 3. Buy a holden
×
  • Create New...
'