XR68UZ

.

6 more to go! thanks GNU UP for posting details of the locksmith!

yup, all keys must be programmed at the same time. other keys are wiped if they are not 8 to go!

if theres enough interest I will arrange another group buy at the same price! can we get 10 people in?

[quote name='JPaulet' date='02 April 2010 - 09:51 AM' timestamp='1270162303' post='996953'] Tried all combinations of pressure, delay and pressure placement. The buttons are dead [/quote] you need to code the buttons to the car as well. • To enter teach mode turn the ignition switch from off to accessories and within 5 seconds press the rear demist switch 3 times. When the mode is entered the door locks will cycle. • Once the mode is entered then all the remote keys will be erased (original keys included). • To teach the keys press any remote keys button (I.e. any of the buttons on any of the remotes you have). • To acknowledge the new key has been stored in memory the door locks will change state then change back again. • Then teach the next key and so on. • Make sure you teach all keys at the same time • Once complete turn off the car and test remotes give the above a try (not with the flip key in the ignition obviously) and let me know you go.

hi guys good to hear your all finding places to get em cut! they do have transponders in them but as per ford instructions if you have 2 original keys you can program it yourself, and just need to get a decent lock smith to cut the key (shouldnt cost more than 30 bux tops)

sorry only got sedan ones.

hey mate I still have a few keys left however they are all for sedans. they will still work on utes however they will have a superfluous boot release button

[quote name='fordriver1' date='17 March 2010 - 10:08 PM' timestamp='1268827696' post='992051'] yeah, and today I doesnt work.... I have 2 original keys, which im using to try to enter program mode. is it first key to ignition- second key to accessories within 5 seconds? [/quote] nope other way around. first to accessories second to ignition

wow that's weird! with the second key are you inserting an original key or the flip key? the first and second key should be original keys, then after it enters programming mode you use the third key.

I believe they are just like that. its not a white white paint on the buttons. if it really bothers you I can swap you one just mail it back to me and ill send you out another

I have registered post numbers. however I sent out 10 keys at the same time so if you want the tracking number pm me your address and ill give you the number. all keys should be delivered by wed at the latest though.

hmm guess registered post isnt as quick as I thought it was!

ill have bf ones in the next week. same price

still got a couple left!

[quote name='slamaa' date='10 March 2010 - 04:39 PM' timestamp='1268203177' post='989695'] Did you recieve payment from me? I have not heard back from you [/quote] hey mate your payment has just cleared. key will be sent out tomorrow!

Here are the instructions for teaching the keys. The keypad (unlock, lock and boot release) is done as follows: • To enter teach mode turn the ignition switch from off to accessories and within 5 seconds press the rear demist switch 3 times. When the mode is entered the door locks will cycle. • Once the mode is entered then all the remote keys will be erased (original keys included). • To teach the keys press any remote keys button (I.e. any of the buttons on any of the remotes you have). • To acknowledge the new key has been stored in memory the door locks will change state then change back again. • Then teach the next key and so on. • Make sure you teach all keys at the same time • Once complete turn off the car and test remotes The instructions for programming the transponder (assuming you have 2 original keys and the flip key has been cut) is as follows: • Insert one of the trained keys into the ignition lock and turn to the accessories position, turn to off and remove the key. • Within 5 seconds insert the second key and turn to the ignition on position. At this point the door locks should cycle to indicate the teach mode has been entered. • To teach additional keys, insert the new key and turn to the ignition position, if successful the door lock cycling will indicate the number of keys taught. • Once acknowledgment has occurred turn the key to off and insert the next key to be taught. • Up to additional 6 keys may be taught in this way. • To exit teach mode leave the ignition on for longer than 10 seconds. • Note: You must have 2 original/programmed keys to do this. If not you will need to find a locksmith who can program the key for you, or go to a Ford Dealer.

those who have paid, keys will be sent out tomorrow and you should receive them by friday/ next monday at the latest!

hi guys thanks for the prompt payment. Keys have arrived and will be shipping them out tuesday. most of you should have them by the end of next week! Heres a list of people who have paid daves3 Brandonn blow off AcidTurbo6 brendoxr6t Barnesy MiKa SHAUNY fordriver1 Still waiting for a few guys payments, I will send them out with preference to those who paid first.

got mine today. thanks!

done! one guys pulled out so there is still one left!

guys keys have landed! I will send all those who have signed up for one a pm with bank details. please deposit money with your USERNAME as a reference, and also send me your postal address. as soon as payment clears the key will be sent out. John

done. 1 remaining!

if you want a hot hatch that is good on fuel, dont look past the gti golf. I worked for vw for 3.5 years and they are VERY good cars.

saw a g6e t in person recently. they are very nice cars! congrats on the buy