Hitman

Well it started with a loss of power low end and then ticking/rattling sound from the box when I put the car into drive and the car stopped, the sound only happens when the in drive and stopped... My Mech had a listen and new straight away what it was..

Thanks for the help guys, I got a good trans cooler some time ago and run redline oil in the box. Last question what company do you recommend?

Hi all, just been told my standard OEM Torque Converter is on the way out its been in the car 9 years so its had a good run, so this question has probably been asked 100 times. What is a good torque Converter and what stall range would I be after the car is doing 320rwk so I am happy with that. Just need a little help/input Thanks

Thanks for the help guys...

Can any one help?

Guys, Need a question answered, will the Brembo 6 pot callipers fit under a set of BA 18’s Typhoon Genuine Rims and what size rotors will I need to go with these callipers to make them fit using the above rims.. All this is going on a BA 2003 XR6 Turbo I am trying to upgrade from my 4 pot AP Racing callipers… Thanks for the help, Dave

May be later on, but I have it all working now and do not what to touch the inside of the car again for a long time...After a few hours of swearing and pulling the car apart to get it all back in...

Well replaced cable and worked 1st go...So should have double checked cable before I installed...

I am getting a new cable to test out as I believe this is causing the issue.

Yep all rdy done that and getting sound, I have plugged in my laptop and get no sound as well. I am starting to believe its the whole cable..

Nothing this has stumped me, just get no audio from Any PC (Could be the cable)...

Mic port volume is up still get nothing, I have plugged the cable into headset out port..

Hi Guys, Need a little help; I have installed a carputer and have had issues getting any sound when connected to the Aux port. I have tested my IPod, IPhone and CD walkman and get sound when connected on the same cable and Aux port. I tried my laptop and no sound as well I don't know whets going on its driving me crazy, it could be a easy fix that I have missed. Thanks for the help. Dave

Well this is a must movie to see next year (Very busy day at work) http://movies.yahoo.com/feature/transformers.html Dave

I get all my gear from, Motorsport Connections Unit 15/ 4A Foundry Rd Seven Hills NSW 2147 ph: (02) 9838 7272 Motor Accessories--W'salers & Mfrs I have been using them for all my fittings for some time now...very good Dave

The undertray was put back on with the xr bar, these are old pic's I now have my GTP bar on the car (The GTP bar is lower) I will take some more pics when I can get under the car.. Dave

This is my setup... oh and it works Dave

Ford will not give me the part number.....so can anyone help? Thx Dave

Guys, I need the part number and price for the fog light surround on the GT-P bar, I have attached a picture of what I need.. Thanks for the help, Dave

Sad day for Austraila.....

More pic’s with oil filter adapter all hooked up to cooler Plastic Shield that goes under the front of the car is going back on and this will have vent holes for air flow..

The mesh will be installed soon to protect the intercooler and the oil cooler soon, my car hardly goes out now (turned into a weekend car) so have heaps of time to mess around on the scoop and the mesh setup.. Would be good to see what the BF setup is like...

We where looking at the Scoop setup on the nissan skyline r34 ztune for the oil cooler... this pic gives a very clear idea on the best way the scoop should sit on the cooler...

The Subaru was the same story, that was the best place for that size cooler it gets max air flow when on the move and it's not inclosed at all, so would not get hot air pocket under the car at all.. As well we are looking at a air for this setup but we will see how it goes..