Actually it is overall tyre diameter, not rim diameter. Perhaps you should check your facts before posting. Rim size in only a factor in some states (from memory W.A. has very strict rim sizes), where QLD, NSW & VIC all run on the tyre diameter rule. The attached link is the Queensland Transport vehicle modification brochure which shows the rules quite clearly. While it can't be used to argue a point of law with an inspector or police officer, the ADR's can be down loaded off of the QLD T/Port website. Pdf_modification_motor_vehicles2.pdf
In QLD, NSW & VIC your only allowed to increase overall tyre diameter by 15mm above the largest factory option (on your tyre placard). The BF XR6T gives you either P235/45R17 or P245/40R18 which means you can use the larger P245/40R18 (653.2mm) and add 15mm, giving you a maximum diameter of 668.2mm. Keep in mind that various brands have slightly different diameters, but generally it's only a matter of 1-2mm on the same size tyre. You can then use a P245/30R20 @ 655mm legally. You can't use a P245/35R20 because it has a diameter of 679.5mm. As far as I'm aware the only legal 20" Tyre that will also fit the front of these is the Nankang NS2000 in a P245/30R20 #95W. I make a point of looking at every XR or FPV I see parked and I'm yet to see a legal tyre package. If anyone comes up with another option I'd like to know as this is all that's stopping me going for a set of 20's. ps :- If there are any FPV F6 owners out there I'd be interested to know what your placard states, as if there is an option for a 19" for example with a lower load rating it may be possible to put an FPV placard on our XR6T's (providing it does not specify FPV on the placard. Regards Bids.
You can't put a narrower tyre than the narrowest factory option. In the XR6 that's a 235/45R17. No point worrying about correct load rating if your tyre width is illegal as well.
Hey mate, Try www.redwalltyres.com.au , the Company is based in Sydney but I think they sell Franchises around the country and someone may have one over there. They can do White, Red, Blue, Yellow ect. or any combination. Regards Craig
The Standard fitment 17" Tyres are 235/45R17 which are 643.3mm Diameter, while the Optional 18" Tyres are 245/40R18 which are 653.2mm. While this gives you an actual diameter difference of 10mm, this will only increase your car height by 5mm overall. Go for it. Regards Craig