Ute Rear Sway Bar

[40RDT]

Has anyone put a rear sway bar on a BA/BF/FG ute? It looks like you have to drill holes in the chassis to fit, is that even legal?

[Jip86]

I put one in my old ba xr8, made it turn in heaps better even with the big boat anchor up front. I'm not 100% sure about legality side of things.

I did the front first and after a short drive I did the back as well. It was alot better with both changed.

However my bf f6 tornado handles better then the modded xr8 did and its stock.

[P_BA_XR6]

I have installed rear sway bar few years ago and I won't go back helps with tramp a little bit, turns in much better and I would also say launches little better. My personally experience has been good results and I have never heard a bad result.

[40RDT]

I have installed rear sway bar few years ago and I won't go back helps with tramp a little bit, turns in much better and I would also say launches little better. My personally experience has been good results and I have never heard a bad result.

that's what my car needs, less tramp. Ive installed new bushes, custom steel saddle plates and koni adj shocks but I still get every now and then. Im keen to try a rear sway bar out now just not real keen on the drilling holes in chassis part

Edited 20/11/13 12:07 PM by 40RDT