hi guys just recently brought a relocation kit for my f6, but the thing is it didnt come with any instructions about where the wires goes all I got was just 2 m length of cable and that's all, any one here able to give me advise on how to do it

much appreciate

What? No battery tray?

I got the the tray and all but no instructions about the wiring

What brand? Sounds a bit dodge. One goes to your starter motor and the other to earth/ground

its a staino brand if that helps, what do I do with the orginal connection do I cut it out or should I just leave it

Insulate the originals and and tie them back neatly somewhere to prevent them arcing on anything. Mine sits nicely inside the Turbo side air box and isn't hurting anything. I've read on here somewhere that people have traced the originals back and cut them to the new length...up to you

Well I done the relocation today cleaned all terminal strips and checked all crimps n found the the car was struggling to hold I idle is it because the lead is too long

Do I have reload my tune to the car

So I put it back how it was from the start and now every time I put the car in drive the car stalls

Clean your throttle body