F6 Intercooler Boost Sensor Hole

[MRO]

Hi Guys,

I just bought a second hand BF F6 intercooler and need to plug the hole where the boost sensor used to be mounted. I am having trouble finding the correct size bolt to do this. I have tried an M12 bolt but this isnt big enough. Does anyone know the exact size bolt I need or have any other suggestions?

Thanks

Edited 20/03/12 01:19 AM by MRO

[Paulie2256]

Just stick a boost sensor in there.

[MRO]

Do you have a boost sensor you want to sell/give to me. Dont really want to pay $150 for something that can be done for $2 with the right sized bolt.

[Paulie2256]

Can also go to a bearing joint and get them to find you a screw or bolt to fit in there.

[arronm]

Take the cooler to a shop that sells gauges etc and get a screwed plug to fit. A bit of thread tape and bobs your uncle. Get the correct thread, because if you sell it on the purchaser may want to reinstall the factory sender.

[Process West]

1/8 BSP plug....source from Pirtek, Enzed or Motorsport connections

[Morgan]

1/8 BSP plug....source from Pirtek, Enzed or Motorsport connections

This is exactly what I was looking for - thanks but already done.